THERMAL-HYDRAULIC DESIGN SUPPORT AND SAFETY ANALYSES OF SEALER UK DEMO

摘要

SEALER (SwEdish Advanced Lead Reactor) is a passively safe lead-cooled reactor designed for commercial power production, under design by the LeadCold company. The reactor is modular in design, allowing for factory production and reduction in investment risk compared with new-build of large Light Water Reactors. Furthermore, its core is designed such that it can generate power for up to 25 years without the need of on-site fuel-cycle operations. The SEALER UK model has specifically been designed to produce base-load power on the UK grid. In the design and safety evaluation process, NRG is currently providing support to LeadCold Reactors with respect to thermal-hydraulic safety analyses utilizing Computational Fluid Dynamics (CFD) competences. The current paper gives a comprehensive description of a 3D CFD model created of SEALER UK Demo, which is a scaled-down demonstrator of SEALER UK. The geometry of the CFD model of SEALER UK Demo as well as the modelling approach and numerical settings are presented here. Assumptions were made in order to make it computationally feasible to perform simulations. These are discussed as well. Subsequently, the 3D CFD model is used to perform steady-state analyses of SEALER UK Demo operating under nominal conditions. Main parameters such as mass flow rates, temperatures and core pressure drops coming from the model match the design values well, with differences being at most a couple percent. Also, it is found that the margin to lead freezing with the current design parameters is more than 50K.