首页> 外文会议>High Voltage Engineering and Application-ICHVE, 2008 International Conference on >Observation of Lightning Current and Ground Potential Rise in Artificially Trigged Lightning Experiment
【24h】

Observation of Lightning Current and Ground Potential Rise in Artificially Trigged Lightning Experiment

机译:人工触发雷电实验中雷电流和地势上升的观测

获取原文

摘要

Lightning current and ground potential rise (GPR) results of artificially trigged lightning experiment in Binzhou of Shandong Province during the summer of 2006 are described in this paper. The variation of grounding resistance of grounding electrode is analyzed according to the data of experiment. From the waveform of lightning current, it can be found that the process of lightning flash has two return-strokes. The amplitude of the first return-stroke is 41.59kA with 6.02/20.24??s waveform, and that of the second return-stroke is 29.59kA with 4.8/11??s waveform. The previous study done by other authors on impulse ground resistance is always limited in the laboratory, which can provide the standard impulse current instead of the factual circumstance. Transient grounding resistance (TGR) including two small return-strokes response is obtained. ATP Simulation is used to calculate the impulse grounding resistance which compares to the factual circumstance. There is time difference between peak current and peak voltage, but the simulation can not tell the difference, which means their front time Tf and time to half value Tt are identical. That is because the simulation model did not take the spark discharge and its electrical parameter change into consideration. The results can help study the process of artificially trigged lightning, meanwhile it proposes the necessity to consider grounding electrode's impulse characteristics under lightning current.
机译:本文描述了2006年山东滨州滨州人工突出的闪电实验的雷电流和地面潜力上升(GPR)结果。根据实验数据分析接地电极的接地电阻的变化。从雷电的波形,可以发现闪电的过程有两个返回笔画。第一个返回行程的幅度为41.59kA,波形6.02 / 20.24 ??波形,第二次返回行程的波形为29.59kA。波形为4.8 /11Ω。以前的研究由其他作者对脉冲接地电阻进行始终限于实验室,其可以提供标准脉冲电流而不是事实情况。获得包括两个小返回行程响应的瞬态接地电阻(TGR)。 ATP仿真用于计算与事实情况相比的脉冲接地电阻。峰值电流和峰值电压之间的时间差,但模拟无法讲述差异,这意味着它们的前时间T F 和时间到半值T T 是相同的。这是因为仿真模型没有考虑火花放电及其电气参数改变。结果可以帮助研究人工触发闪电的过程,同时它提出了必须考虑雷电下接地电极的脉冲特性的必要性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号