Performance Improvement of Wavelet Noise Reduction Based on New Threshold Function

摘要

Acoustic emission (AE) detection, as a non-electrical detection method, is very suitable for effective fault detection of power equipment with a strong electromagnetic field. However, the AE signal collected at industrial sites often contains a lot of interference noise, affecting the analysis and prediction of faults. In this study, a wavelet denoising method based on a new threshold function is proposed, to achieve a noise reduction in the low signal-to-noise ratio (SNR) signals. Simulation experiment results show that the proposed threshold function not only overcomes the shortcomings of the discontinuous hard threshold function, but also solves the constant deviation of the soft threshold function. What’s more, the proposed function achieves a good adaptability. When SNR = 10 dB: The SNR of the new threshold is 20.6622, and the RMSE is 0.0026. The SNR of the hard threshold is 20.2246 and the RMSE is 0.0027, compared with the traditional hard threshold method, the SNR of the new threshold is increased by 2.16% and the root mean square error (RMSE) is reduced by 3.7%; the SNR of the soft threshold is 15.5656, and the RMSE is 0.0047, compared with the traditional soft threshold method, the new threshold has a 32.74% increase in SNR and a 40.43% reduction in RMSE. When SNR = -10 dB: The SNR of the new threshold is 4.2602, and the RMSE is 0.0172. The SNR of the hard threshold is 3.8558 and the RMSE is 0.0182, compared with the traditional hard threshold method, the SNR of the new threshold is increased by 10.49% and the RMSE is reduced by 5.49%; the SNR of the soft threshold is 2.1625, and the RMSE is 0.0212, compared with the soft threshold method, SNR is improved by 97% and RMSE is reduced by 18.87%. Performance analyses have proved that the improved wavelet denoising method can obtain a good noise reduction effect. It is very helpful for AE signal analysis with the generally low SNR, which can improve the accuracy of failure identification in subsequent acts.