首页> 外文会议>IEEE Symposium on VLSI Circuits >Z-PIM: An Energy-Efficient Sparsity Aware Processing-In-Memory Architecture with Fully-Variable Weight Precision
【24h】

Z-PIM: An Energy-Efficient Sparsity Aware Processing-In-Memory Architecture with Fully-Variable Weight Precision

机译:Z-PIM:具有可变可变精度的节能型稀疏感知内存处理架构

获取原文

摘要

This paper presents Z-PIM, an energy-efficient processing-in-memory (PIM) architecture that supports zero-skipping operations and fully-variable weight bit-precision for efficient deep neural network (DNN). The 8T-SRAM cell based bit-serial operation with hierarchical bit-line structure enables variable weight precision and reduces bit-line switching by 95.42% in convolution layers of VGG-16. Z-PIM handles abundant zeros in weight data by skip-reading their corresponding input data while read-sequence rearranging and pipelining improves throughput by 66.1%. In addition, diagonal accumulation logic is proposed to accumulate both partial-sums for bit-serial operation and spatial products. As a result, the Z-PIM chip fabricated in a 65nm process consumes average 5.294mW power and achieves 0.31–49.12 TOPS/W energy efficiency for convolution operations as sparsity and weight bit-precision vary from 0.1 to 0.9 and 1b to 16b, respectively.
机译:本文介绍了Z-PIM,这是一种节能的内存中处理(PIM)架构,该架构支持零跳操作和完全可变的权重比特精度,以实现有效的深度神经网络(DNN)。基于8T-SRAM单元的位串行操作具有分层位线结构,可实现可变的权重精度,并在VGG-16的卷积层中将位线切换降低95.42%。 Z-PIM通过跳过读取相应的输入数据来处理重量数据中的大量零,而读取序列重排和流水线则将吞吐量提高了66.1%。另外,提出了对角线累加逻辑以累加用于位串行操作的部分和和空间积。结果,采用65nm工艺制造的Z-PIM芯片平均消耗5.294mW功率,并且由于稀疏度和权重比特精度分别从0.1到0.9和1b到16b分别达到0.31–49.12 TOPS / W的卷积运算能量效率。 。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号