首页> 外文会议>SPIE Astronomical Telescopes + Instrumentation Conference >Straylight analysis for the externally occulted Lyot solar coronagraph ASPIICS
【24h】

Straylight analysis for the externally occulted Lyot solar coronagraph ASPIICS

机译:外部掩盖的Lyot太阳日冕仪ASPIICS的杂散光分析

获取原文

摘要

The ESA formation Flying mission Proba-3 will fly the giant solar coronagraph ASPIICS. The instrument is composed of a 1.4 meter diameter external occulting disc mounted on the Occulter Spacecraft and a Lyot-style solar coronagraph of 50mm diameter aperture carried by the Coronagraph Spacecraft positioned 144 meters behind. The system will observe the inner corona of the Sun. as close as 1.1 solar radius. For a solar coronagraph, the most critical source of straylight is the residual diffracted sunlight, which drives the scientific performance of the observation. This is especially the case for ASPIICS because of its reduced field-of-view close to the solar limb. The light from the Sun is first diffracted by the edge of the external occulter. and then propagates and scatters inside the instrument. There is a crucial need to estimate both intensity and distribution of the diffraction on the focal plane. Because of the very large size of the coronagraph. one cannot rely on representative full scale test campaign. Moreover, usual optics software package are not designed to perform such diffraction computation, with the required accuracy. Therefore, dedicated approaches have been developed in the frame of ASPIICS. First, novel numerical models compute the diffraction profile on the entrance pupil plane and instrument detector plane (Landini et al., Rougeot et al.), assuming perfect optics in the sense of multi-reflection and scattering. Results are confronted to experimental measurements of diffraction. The paper reports the results of the different approaches.
机译:ESA编队Proba-3飞行任务将飞行巨型日冕仪ASPIICS。该仪器由安装在Occulter航天器上的直径1.4米的外部掩星盘和位于144米后的Coronagraph航天器携带的直径为50mm的Lyot型太阳日冕仪组成。该系统将观测太阳的内部日冕。接近1.1太阳半径对于日冕仪来说,杂散光的最关键来源是残留的衍射太阳光,这驱动了观测的科学性能。对于ASPIICS来说尤其如此,因为它靠近太阳肢的视场减小了。来自太阳的光首先被外部掩星的边缘衍射。然后在仪器内部传播和散射。迫切需要估算焦平面上衍射的强度和分布。因为日冕仪的尺寸非常大。一个人不能依靠有代表性的全面测试活动。而且,通常的光学软件包并未设计成以所需的精度执行这种衍射计算。因此,已经在ASPIICS框架中开发了专用方法。首先,新的数值模型假设在多次反射和散射方面具有完美的光学原理,可以计算入射光瞳平面和仪器检测器平面上的衍射分布(Landini等,Rougeot等)。结果面对衍射的实验测量。本文报告了不同方法的结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号