首页> 外文会议>Offshore technology conference >Advanced Dual Refrigerant Expansion Cycle for Liquefaction
【24h】

Advanced Dual Refrigerant Expansion Cycle for Liquefaction

机译:先进的双制冷剂液化膨胀循环

获取原文
获取外文期刊封面目录资料

摘要

This paper presents a LNG Liquefaction cycle configuration using two stages of methane expansion and a single stage of nitrogen expansion (Dual Refrigerant) to improve the efficiency of the conventional methane and nitrogen refrigerant expansion cycle. The chosen configuration further optimizes the composite cooling and heating curve of the liquefaction cycle, resulting in a higher thermodynamic efficiency. The production efficiency of the liquefaction cycle can be improved by reducing the interval between the cooling curve of the natural gas and the warming curve of the refrigerant: the closer both curves are, the better the efficiency of the cycle. This optimization is achieved by adjusting the refrigerant operating temperatures and pressures. The advanced dual refrigerant expansion cycle includes three levels of expansion, each having different temperature and pressure levels. In the methane expansion loop there are two stages, which are classified warm and cold. The warm loop is applied in the pre-cooling zone and the cold loop is responsible for the main liquefaction. The nitrogen loop is a single stage and is used for sub-cooling. This configuration allows the methane and nitrogen warming curve to closely match the cooling curve of the natural gas cooling curve by changing the methane and nitrogen warming curve from two straight lines into multiple intersecting straight lines of different gradient. That is to say, the additional new methane expander generates an added inflection point within the cold composite curve. As a result, thermodynamic inefficiencies are minimized and the power requirements are reduced when compared to Methane & Nitrogen Expansion Cycle. In comparison with other previous expansion cycles, the cycle efficiency has increased approximately from 13.13 to 12.08 kW/ton/day (8% efficiency increase) assuming similar feed gas (methane: 80%, MW: 21.38). The composition of this feed gas is representative for associated gas or pipe line gas which is preliminary treated to remove bulk water and hydrocarbon condensate. A case study is presented for an open sea associated gas FLNG concept, comparing three kinds of liquefaction processes (Double Nitrogen Expansion Cycle, Methane & Nitrogen Expansion Cycle and Developed Dual Refrigerant Expansion Cycle). A Life Cycle Cost (LCC) analysis based on Net Positive Value (NPV) also shows an improvement in terms of project NPV, against a minor increment of the CAPEX of these cycles.
机译:本文提出了一种LNG液化循环配置,该结构使用两个阶段的甲烷膨胀和一个阶段的氮气膨胀(双制冷剂)来提高常规甲烷和氮气制冷剂膨胀循环的效率。所选配置进一步优化了液化循环的复合冷却和加热曲线,从而提高了热力学效率。液化循环的生产效率可以通过减小天然气的冷却曲线和制冷剂的加热曲线之间的间隔来提高:两条曲线越近,循环效率越高。通过调节制冷剂的工作温度和压力可以实现这种优化。先进的双制冷剂膨胀循环包括三个膨胀等级,每个膨胀等级具有不同的温度和压力等级。在甲烷膨胀回路中,有两个阶段,分为热阶段和冷阶段。在预冷区中使用了暖水回路,而冷水回路负责主要的液化。氮气回路是单级的,用于过冷。通过将甲烷和氮气的升温曲线从两条直线变为具有不同梯度的多个相交的直线,该配置允许甲烷和氮气的升温曲线与天然气冷却曲线的冷却曲线紧密匹配。也就是说,附加的新甲烷膨胀器在冷复合曲线内产生了一个增加的拐点。结果,与甲烷和氮气膨胀循环相比,热力学效率低下达到了最小,功率要求降低了。与其他先前的膨胀循环相比,假设进料气相似(甲烷:80%,MW:21.38),循环效率大约从13.13 kW /吨/天增加到12.08 kW /吨/天(效率提高8%)。该进料气的组成代表伴生气或管线气,它们经过了预处理以去除大量的水和烃冷凝物。提出了一个关于海上伴生气FLNG概念的案例研究,比较了三种液化过程(双氮膨胀循环,甲烷和氮膨胀循环以及已开发的双制冷剂膨胀循环)。基于净正值(NPV)的生命周期成本(LCC)分析也显示出项目净现值方面的改进,而这些周期的CAPEX却略有增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号