首页> 外文会议>Residuals and biosolids conference >LESSONS LEARNED FROM ASSESSMENT OF FOUR LABORATORY-SCALE SLUDGE DEWATERABILITY METHODS USED DURING AN ANAEROBIC DIGESTION PILOT PERFORMED AT THE ROBERT W. HITE TREATMENT FACILITY
【24h】

LESSONS LEARNED FROM ASSESSMENT OF FOUR LABORATORY-SCALE SLUDGE DEWATERABILITY METHODS USED DURING AN ANAEROBIC DIGESTION PILOT PERFORMED AT THE ROBERT W. HITE TREATMENT FACILITY

机译:从罗伯特·W·赫特处理设施进行厌氧消化试点过程中使用的四种实验室污泥脱水方法的评估中学到的经验教训

获取原文

摘要

Efficient biosolids dewaterability is an operationally and financially important goal for Water Resource Recovery Facilities (WRRF). Experiences at the Metro Wastewater Reclamation District corroborate what has been observed elsewhere; enhanced biological phosphorus removal negatively affects dewaterability and results in nuisance struvite scaling and deposits. Pilot tests on waste activated sludge pretreatment technologies were conducted at the Robert W. Hite Treatment Facility in 2017 with focus on both struvite control and the impact on dewaterability. Four different methods (limit dryness test, modified centrifugal technique, pneumatic press, and thermogravimetric cake solids analysis coupled with polymer demand determined electrophoretically) were used to assess the changes in dewaterability. The key lessons from this evaluation are: (A) Consistency in pilot operations and bench dewaterability assessment methods is critical. (B) Polymer demand determined externally at Bucknell University and Klaranlagen Beratung Kopp is higher than the polymer demand determined on-site, which speaks to the importance of assessing dewaterability with fresh sludge. (C) Conventional total solids analysis for cake can be skewed by the presence of struvite, which partially volatizes above 70°C. This is not the case for when cake solids are determined thermogravimetrically. (D) Cake solids determined by Modified Centrifugal Technique by two different laboratories was consistent despite the differences in conditioning. All of the methods evaluated provide more information on dewaterability indicators of cake solids and polymer dose compared to typically used rate assessments such as Capillary Suction Time and Specific Resistance to Filtration. As more WRRF are implementing biological phosphorus removal as a sustainable alternative to reduce effluent phosphorus, it is critical to both understand its impact on dewaterability and have the ability to easily and quickly assess changes in dewaterability.
机译:有效的生物固体脱水能力是水资源回收设施(WRRF)在运营和财务上的重要目标。地铁废水回收区的经验证实了在其他地方观察到的情况;增强的生物除磷能力会对脱水性产生负面影响,并导致讨厌的鸟粪石水垢和沉积物。 2017年,Robert W.Hite处理设施对废物活性污泥预处理技术进行了试点测试,重点是鸟粪石控制和对脱水性的影响。四种不同的方法(极限干燥测试,改进的离心技术,气动压力机和热重饼固形物分析,以及通过电泳确定的聚合物需求)用于评估脱水性的变化。此次评估的主要教训是:(A)试点操作和台架脱水性评估方法的一致性至关重要。 (B)在Bucknell University和Klaranlagen Beratung Kopp外部确定的聚合物需求高于现场确定的聚合物需求,这表明评估新鲜污泥的脱水能力的重要性。 (C)鸟粪石的存在会歪曲饼的常规总固体含量,而鸟粪石会在70°C以上部分挥发。当饼状固体通过热重法测定时不是这种情况。 (D)尽管条件不同,但由两个不同实验室通过改进的离心技术测定的蛋糕固体是一致的。与通常使用的速率评估(例如毛细抽吸时间和抗滤性)相比,所评估的所有方法都提供了有关饼状固体和聚合物剂量的脱水性指标的更多信息。随着越来越多的WRRF将生物除磷作为减少废水中磷的可持续替代方案,至关重要的是既要了解其对脱水性的影响,又要具有轻松,快速地评估脱水性变化的能力。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号