首页> 外文会议> >Ultrasonic Propeller with Electrically Controllable Propulsion Direction
【24h】

Ultrasonic Propeller with Electrically Controllable Propulsion Direction

机译:具有电控推进方向的超声波推进器

获取原文

摘要

This paper introduces a novel ultrasonic propeller with electrically controllability over its propulsion direction. Built on a 1.02 mm thick nickel-coated lead zirconate titanate (PZT) substrate, the propeller consists of 18 sectors of individually accessible Fresnel lens that are composed of Parylene air-cavity-reflectors on top of the front-side nickel electrode. A backside air-reflector is added to prevent any propulsion from the backside that may cancel the propulsion from the front side. A fabricated propeller weighing 4.9 grams is measured to have (1) a maximum perpendicular thrust of 13.8mN in water when driven by 80Vpp applied to all the sectors and (2) a maximum lateral thrust of 2.1mN under 80Vpp applied to a single sector.
机译:本文介绍了一种新型的超声波推进器,该推进器在其推进方向上具有电可控性。螺旋桨建立在1.02毫米厚的镍镀锆钛酸铅(PZT)基底上,由18个可单独访问的菲涅耳透镜扇区组成,这些透镜由位于正面镍电极顶部的聚对二甲苯气穴反射镜组成。添加了背面空气反射器,以防止来自背面的任何推动力可能抵消来自正面的推动力。经测量,重量为4.9克的预制螺旋桨在(80V)驱动下具有(1)在水中的最大垂直推力为13.8mN pp 适用于所有扇区,并且(2)在80V下的最大侧向推力为2.1mN pp 适用于单个部门。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号