DESIGN OF A WIDEBAND DUAL BEAM WIDTH, DUAL POLARIZED, INTEGRATED RCS MEASUREMENT AND MONOPULSE TRACKING ANTENNA

摘要

The design of a specialized reflector antenna set that supports dual polarization, dual beam widths, and an integrated wideband monopulse tracking capability in the X-band range is described in this paper. The reflector antenna code available at The Ohio State University has been used as the design tool. The design of such an antenna has posed several challenges in the feed and reflector assemblies. The requirement for an integrated wideband monopulse has resulted in a feed array that contains 5 rectangular feed elements with a center-to-center spacing of 1" and a diamond configuration. The 5 feed design has been selected to enable a shared feed array and reflector surface for both transmit and receive beams that eliminates the need for a high-power wideband receiver protector in the radar system. The center feed element is used for transmit waveform and the 4 outer elements are used as receive elements only. Each feed element operates with horizontally and vertically polarized waveforms, requiring a total of 8 waveguide input ports. In this paper, the challenges of the dual beam widths, dual polarized, integrated RCS and tracking antenna are delineated and the tradeoffs among several design configurations are shown. The final design is selected based on the performance predictions using The Ohio State University Reflector Antenna Code. The performance of the antenna has been validated at the OSU compact range for pattern and gain. Both the design and measurement data are presented in this paper.