首页> 外文会议>Conference on active and passive smart structures and integrated systems >Design and investigation of an enhanced magneto-mechanical nonlinear energy harvester
【24h】

Design and investigation of an enhanced magneto-mechanical nonlinear energy harvester

机译:增强型磁机械非线性能量采集器的设计与研究

获取原文

摘要

In this work, a unique magneto-mechanical energy harvester is fabricated, modeled, and investigated. The magneto-mechanical energy harvester consists of a levitated magnet, forming a magnetic spring, connected to oblique, mechanical springs. Upon base-excitation, the levitated magnet experiences nonlinear forces in the direction of motion due to the mechanical and magnetic spring. Voltage is induced in a coil placed around the body of the energy harvester. Results confirm the oblique, mechanical springs and magnetic springs introduce geometric negative and hardening stiffnesses. This behavior allows for the use of disc magnets instead of ring magnets, reducing energy dissipation due to Coulomb damping. Forward and reverse sinusoidal frequency sweep measurements at a constant acceleration of 0.75g shows the characteristic backbone curve exhibited by Duffing-type nonlinear oscillators. The frequency response of the proposed device demonstrates the broadband capabilities with a measured peak power of approximately 7-mW at 15Hz. Results from the model are in good agreement with data obtained from the experiment.
机译:在这项工作中,制造,建模和研究了独特的磁机械能采集器。磁机械能量收集器由悬浮磁铁组成,形成磁弹簧,并与倾斜的机械弹簧相连。进行基极激励后,由于机械弹簧和磁性弹簧的作用,悬浮磁铁在运动方向上会受到非线性力的作用。在能量收集器主体周围放置的线圈中感应出电压。结果证实了倾斜,机械弹簧和磁性弹簧会引入几何负刚度和硬化刚度。此行为允许使用盘形磁体代替环形磁体,从而减少了由于库仑阻尼而产生的能量耗散。在0.75g的恒定加速度下进行正弦和正弦正弦扫频测量,显示了Duffing型非线性振荡器表现出的特征主干曲线。拟议中的设备的频率响应展示了宽带能力,在15Hz时测得的峰值功率约为7mW。该模型的结果与从实验中获得的数据非常吻合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号