首页> 外文会议>International SoC Design Conference >A quarter-rate 3-tap DFE for 4Gbps data rate with switched-capapctiors based 1st speculative tap
【24h】

A quarter-rate 3-tap DFE for 4Gbps data rate with switched-capapctiors based 1st speculative tap

机译:四分之一速率3抽头DFE可实现4Gbps数据速率,并具有基于1 st 投机抽头的开关电容器

获取原文

摘要

This paper presents a quarter-rate 3-tap DFE design for 4Gbps data rate with switched-capacitors based 1st speculative tap. We propose a quarter-rate DFE to supplement a drawback of switched-capacitors based half-rate DFE. In the half-rate DFE, comparators have not only low input capacitances but also low transconductance (low sensitivity) in order to eliminate the first post-cursor. Therefore, the comparators need to have enough pull-down time to make an accurate decision for a bit. The quarter-rate DFE approach has advantages of enough pull-down time because of operating at lower frequency of each data path and widely opened eye diagram at the output. In addition, it consumes less power than the half-rate DFE. The DFE is simulated with 180nm technology node and 1.8V power supply. The S21 parameter (channel loss) is 27 dB at 4 Gbps data rate, and the power consumption is 14.52 mW.
机译:本文介绍了基于开关电容的1 st 投机抽头,针对4Gbps数据速率的四分之一速率3抽头DFE设计。我们提出了四分之一速率DFE,以弥补基于开关电容器的半速率DFE的缺点。在半速率DFE中,比较器不仅具有低输入电容,而且具有低跨导(低灵敏度),从而消除了第一个后光标。因此,比较器需要有足够的下拉时间来做出准确的决定。四分之一速率DFE方法的优点是下拉时间足够,这是因为每个数据路径的工作频率较低,并且输出处的眼图开阔。此外,它比半速率DFE消耗的功率更少。 DFE采用180nm技术节点和1.8V电源进行仿真。在4 Gbps数据速率下,S21参数(信道损耗)为27 dB,功耗为14.52 mW。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号