首页> 外文会议>Conference on Lasers and Electro-Optics >3D temperature mapping of cellular passive cooling structures fabricated by additive manufacturing for lasers

【24h】

3D temperature mapping of cellular passive cooling structures fabricated by additive manufacturing for lasers

机译：通过激光增材制造制造的蜂窝式被动冷却结构的3D温度映射

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

3D temperature mapping of passive cooling structures built by additive manufacturing was interrogated by in-fiber Rayleigh backscattering using optical frequency domain reflectometry for therm-mechanic structure optimization for laser and photonic systems.

机译：光纤内瑞利反向散射使用光学频域反射法对通过增材制造构建的被动冷却结构的3D温度映射进行了询问，该光学频域反射法用于优化激光和光子系统的热机械结构。

著录项

来源
《Conference on Lasers and Electro-Optics 》|2017年|1-2|共2页
会议地点
作者
Shuo Li; Ran Zou; Aidong Yan; Lin Cheng; Albert To; Kevin Chen;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类
关键词
Temperature distribution; Temperature measurement; Three-dimensional displays; Cooling; Heating systems; Optical fibers; Temperature sensors;

机译：温度分布;温度测量;三维显示;冷却;加热系统;光纤;温度传感器;

相似文献

外文文献
中文文献
专利

1. Investigation on the failure mechanism of triply periodic minimal surface cellular structures fabricated by Vat photopolymerization additive manufacturing under compressive loadings [J] . Keshavarzan M., Kaclichodaei M., Badrossamay M., Mechanics of materials . 2020 ,第Jana期

机译：压缩载荷作用下Vat光聚合增材制造三周期周期性最小表面胞结构的失效机理研究
2. An Improved Density-Based Design Method of Additive Manufacturing Fabricated Inhomogeneous Cellular-Solid Structures [J] . Zhu Yu, Zhao Jiaqi, Zhang Ming, International Journal of Precision Engineering and Manufacturing . 2020 ,第1期

机译：一种改进的基于密度的添加剂制造的设计方法，制成的不均匀细胞固体结构
3. Open-cellular copper structures fabricated by additive manufacturing using electron beam melting [J] . D.A. Ramirez, LE. Murr, S.J. Li, Materials Science and Engineering . 2011 ,第16a17期

机译：使用电子束熔化通过增材制造制造的开孔铜结构
4. 3D temperature mapping of cellular passive cooling structures fabricated by additive manufacturing for lasers [C] . Shuo Li, Ran Zou, Aidong Yan, Conference on Lasers and Electro-Optics . 2017

机译：通过添加剂制造用于激光器的蜂窝被动冷却结构的3D温度映射
5. 3D printing food, foam and forces: Additive manufacturing of edible constructs, cellular structures and actuators [D] . Lipton, Jeffrey Ian 2015

机译：3D打印食物，泡沫和力：可食用结构，蜂窝结构和促动器的增材制造
6. Effect of the Solution Temperature on the Precipitates and Grain Evolution of IN718 Fabricated by Laser Additive Manufacturing [O] . Yu Cao, Pucun Bai, Fei Liu, 2020

机译：固溶温度对激光增材制造的IN718析出相和晶粒演化的影响
7. Correction to: Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing [O] . Emre Tascioglu, Yusuf Karabulut, Yusuf Kaynak 2020

机译：校正：热处理温度对316L不锈钢制造的微观结构，机械和磨损行为的激光粉末添加剂制造

3D temperature mapping of cellular passive cooling structures fabricated by additive manufacturing for lasers

摘要

著录项

相似文献

相关主题

期刊订阅