Running is one of the most practiced sports around the world and it dates back to Ancient Greece. Running became an Olympic sport in 1896 and today is mostly performed for fun and to stay in shape. Nowadays, athletic shoe companies make claims on the performance of the type of shoes they manufacture. Some of their claims include shoes that allow free movements, fit like a glove, and are in complete harmony with human mechanics. The preceding characteristics are those of so-called barefoot running shoes. Robillard explains that minimalist running shoes could be defined as those that provide limited or no support and only minimal protection, with the heel at the same level as the forefoot. Even though running may have been investigated, however, there is not enough analyses on barefoot running shoes. The objective of this study was to investigate the load distribution on the feet of a healthy running adult wearing barefoot shoes through experimental work and finite element analysis (FEA). The methodology used in this study included experimental as well FEA. Tests were conducted with a 175-lb adult subject wearing a pair of minimalist shoes. Experimental data were collected and used to perform Finite Element Analysis. The barefoot shoes were modeled with an equivalent thickness of 0.453 inch, and the following parameters were experimentally determined such as the Young's modulus of 467 psi, a density of 0.0025 lb/in~3, and a Poisson's ratio of 0.08. The simulation results yielded a maximum compressive stress of 38.71 psi in the toe region. This stress level was approximately one-half of the stresses generated in the heel region of conventional sport shoes. This study, further, revealed the reduction of stresses at the heel region with barefoot shoes resulting in lower risk of pain and injury to the foot in the absence of impact transients ordinarily experienced with conventional shoes.
展开▼
