首页> 外文会议>IEEE Bipolar/BiCMOS Circuits and Technology Meeting >A 24GHz signal generator with 30.8 dBm output power based on a power amplifier with 24.7 dBm output power and 31 PAE in SiGe
【24h】

A 24GHz signal generator with 30.8 dBm output power based on a power amplifier with 24.7 dBm output power and 31 PAE in SiGe

机译:基于功率放大器的24GHz信号发生器,输出功率30.8 dBm,功率放大器具有24.7 dBm输出功率和31%的SiGe PAE

获取原文

摘要

High-frequency systems such as mm-wave radar transmitters and LO/RF chains in vector network analyzers (VNAs) often require the generation of signals with high output power. While these systems benefit considerably from the reduction in size and weight provided by SiGe integration, their output power must be further increased in order to meet the performance of other technologies (e.g. GaAs). To this end, a SiGe signal generator was developed that achieves 28.7 dBm peak output power with 21.9% of PAE and over 27.4 dBm of output power over its whole frequency range from 19.7 GHz to 28.2 GHz. The output power is scalable with DC current up to a maximum of 30.8 dBm with 17.6% PAE. It is based on a voltage controlled oscillator (VCO), power amplifier cells (PA cells) and lumped-element Wilkinson power combiners/dividers. Its phase noise is less than -94 dBc/Hz at 1MHz offset over the entire frequency range. The developed single PA cell achieves a maximum saturated output power P of 24.7 dBm with a peak PAE of 31%.
机译:诸如毫米波雷达发射机和矢量网络分析仪(VNA)中的LO / RF链之类的高频系统通常需要生成具有高输出功率的信号。尽管这些系统从SiGe集成提供的尺寸和重量的减小中受益匪浅,但必须进一步提高其输出功率,才能满足其他技术(例如GaAs)的性能。为此,开发了一种SiGe信号发生器,在其19.7 GHz至28.2 GHz的整个频率范围内,具有21.9%的PAE和27.4 dBm的输出功率,可实现28.7 dBm的峰值输出功率。输出功率是可扩展的,直流电流最大为30.8 dBm,PAE为17.6%。它基于压控振荡器(VCO),功率放大器单元(PA单元)和集总元件Wilkinson功率组合器/分频器。在整个频率范围内,在1MHz偏移下,其相位噪声均小于-94 dBc / Hz。开发的单个PA电池可实现24.7 dBm的最大饱和输出功率P,峰值PAE为31%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号