Experimental investigation on laser performance of distributed side-pumping fiber amplifier

机译：分布式侧抽光纤放大器激光性能的实验研究

获取原文

获取外文期刊封面目录资料

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

1+1 type distributed-side pumping active fibers were fabricated. Pumped with 976nm LD, over 1kW output power was achieved at 1064nm and 581W power was launched into the coupling unit via one port.

机译：制作了1 + 1型分布侧抽运活性纤维。用976nm LD泵浦，在1064nm处实现了超过1kW的输出功率，并且通过一个端口向耦合单元发射了581W的功率。

著录项

来源
《Conference on Lasers and Electro-Optics Pacific Rim》|2015年|1-2|共2页
会议地点
作者
Cong Gao; Li Ni; Xiaolong Wang; Yuying Wang; Zhen Wang; Kun Peng; Zhihua Huang; Jianjun Wang; Feng Jing; Aoxiang Lin;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类
关键词

相似文献

外文文献
中文文献
专利

1. The Influence of Fused Depth on the Side-Pumping Combiner for All-Fiber Lasers and Amplifiers [J] . Chengmin Lei, Zilun Chen, Jinyong Leng, Lightwave Technology, Journal of . 2017,第10期

机译：熔融深度对全光纤激光器和放大器的侧泵合路器的影响
2. Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers [J] . Qirong Xiao, Ping Yan, Yaping Wang, Optics Communications: A Journal Devoted to the Rapid Publication of Short Contributions in the Field of Optics and Interaction of Light with Matter . 2012,第8期

机译：单片光纤激光器和放大器的熔融角抛光多点侧泵浦耦合器
3. Experimental Investigations on TMI and IM-FWM in Distributed Side-Pumped Fiber Amplifier [J] . International journal of applied mechanics . 2020,第3期

机译：分布式侧泵浦光纤放大器TMI和IM-FWM的实验研究
4. Experimental investigation on laser performance of distributed side-pumping fiber amplifier [C] . Cong Gao, Li Ni, Xiaolong Wang, Conference on Lasers and Electro-Optics Pacific Rim . 2015

机译：分布式侧泵浦光纤放大器激光性能的实验研究
5. Performance of distributed fiber Raman amplifiers with incoherent pumps. [D] . Zhang, Ting. 2005

机译：带非相干泵的分布式光纤拉曼放大器的性能。
6. Quasi-distributed fiber optic sensor-based control system for interstitial laser ablation of tissue: theoretical and experimental investigations [O] . Leonardo Bianchi, Sanzhar Korganbayev, Annalisa Orrico, 2021

机译：基于准分布的光学传感器的基于间隙激光灭菌组织的控制系统：理论和实验研究
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Bragg Grating Reflector Fiber Laser for Vibration Measurement: Theoretical andExperimental Investigation with Emphasis on the Frequency Response (Bragg-Gitter Fiber-Laser for Vibrasjonsmaling) [R] . Karlsson, A., Bjoernson, J. O., Havsgard, G. B. 1996

机译：用于振动测量的布拉格光栅反射器光纤激光器：强调频率响应的理论和实验研究（用于Vibrasjonsmaling的布拉格 - Gitter光纤激光器）

Experimental investigation on laser performance of distributed side-pumping fiber amplifier

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅