首页> 外文会议>ASME power conference >ADMISSION OF BYPASS STEAM INTO A WATER COOLED CONDENSER AND AIR COOLED CONDENSER. SIMILARITIES, DIFFERENCES AND AREAS OF CONCERN
【24h】

ADMISSION OF BYPASS STEAM INTO A WATER COOLED CONDENSER AND AIR COOLED CONDENSER. SIMILARITIES, DIFFERENCES AND AREAS OF CONCERN

机译:将旁路蒸汽进入水冷式冷凝器和空气冷式冷凝器。关注点的相似性,差异和区域

获取原文

摘要

In power plant locations with adequate supply of cooling water the steam from the steam turbine is condensed in a water cooled condenser. In most instances circulating water from the cooling tower is used to condense the turbine exhaust steam. In other instances once through cooling is deployed wherein water from a lake, river or sea is used to condense the turbine exhaust steam. In water challenged locations or locations where wet cooling cannot be deployed due to permitting or regulatory issues, the steam from the steam turbine is condensed in an air cooled condenser (ACC) wherein ambient air is used to cool and condense the turbine exhaust steam. In a combined cycle plant, during normal operation, the water or air cooled condenser condenses the turbine exhaust steam. During bypass operation, when the steam turbine is out of service, the high-pressure steam from the HRSG is attemperated in a pressure reducing/desuperheating (PRD) valve and then admitted into the water cooled or air cooled condenser. The bypass steam flow is substantially higher than the design turbine exhaust steam flow and the duration of bypass operation can vary from a few hours to several weeks. The requirements for admission of bypass steam into a water cooled condenser are substantially different from that for an air cooled condenser. In a water cooled condenser the bypass steam is admitted in the steam dome. The bypass steam as well as the turbine exhaust steam is condensed outside the tubes. In an air cooled condenser the bypass steam is admitted in the large diameter steam duct. The bypass, as well as the turbine exhaust steam (normal operation), is condensed inside the tubes. There are similarities and differences in the requirements for admission of bypass steam into a water cooled and air cooled condenser. The differences must be identified and addressed to ensure safe and reliable performance of the condenser.
机译:在有充足冷却水供应的发电厂位置,来自蒸汽轮机的蒸汽在水冷冷凝器中冷凝。在大多数情况下,来自冷却塔的循环水用于冷凝涡轮机废气。在其他情况下,一旦通过冷却就被部署,其中来自湖泊,河流或海洋的水被用来冷凝涡轮机废气。在缺水地区或由于许可或监管问题而无法进行湿冷的地区,来自蒸汽轮机的蒸汽在空冷冷凝器(ACC)中冷凝,其中环境空气用于冷却和冷凝涡轮机废气。在联合循环工厂中,在正常运行期间,水冷或空冷的冷凝器会冷凝涡轮废气。在旁路运行期间,当蒸汽轮机停止运行时,来自HRSG的高压蒸汽在减压/减温(PRD)阀中进行调温,然后进入水冷式或空冷式冷凝器。旁路蒸汽流量显着高于设计涡轮机排气蒸汽流量,旁路运行的持续时间可能从几小时到几周不等。旁路蒸汽进入水冷冷凝器的要求与空气冷冷凝器的要求大不相同。在水冷冷凝器中,旁通蒸汽进入蒸汽气室。旁路蒸汽以及涡轮机排出的蒸汽在管道外冷凝。在风冷冷凝器中,旁路蒸汽进入大直径蒸汽管道。旁路以及涡轮机排气(正常运行)在管道内冷凝。旁路蒸汽进入水冷和空冷冷凝器的要求有异同。必须识别并解决这些差异,以确保冷凝器的安全可靠的性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号