首页> 外文会议>International Commission on Irrigation and Drainage;International congress on irrigation and drainage >SIMULATING OUTFLOW DISCHARGE THROUGH CONTROL GATE IN MOVABLE WEIR USING THE FLOW-3D MODEL
【24h】

SIMULATING OUTFLOW DISCHARGE THROUGH CONTROL GATE IN MOVABLE WEIR USING THE FLOW-3D MODEL

机译:使用Flow-3D模型模拟可移动堰中的控制门溢流

获取原文

摘要

This study was performed to simulate outfl ows through control gates in the movable weirusing the FLOW-3D model, which is the 3-dimensional numerical hydraulic model. Through afi eld experiment for the Baekje weir located in the Geum river basin, the measured outfl owswere compared with the simulated outfl ows which were obtained by the analysis of eachturbulent model within the FLOW-3D model. The table of weir discharge rating by the openrate of control gates was provided through verifying the boundary condition of downstream.To select the appropriate turbulent model in simulating outfl ows by the open rate of controlgate, the measured outfl ows of fi eld experiments were compared with the simulated resultsby each turbulent model, which is composed of mixing length model, one equation turbulentenergy model, κ-ε model, RNG (Renormalized Group Theory) model, and LES (Large EddySimulation) model. From the above result, RNG model was found to the optimal turbulentmodel to simulate the outfl ows through control gates in the Baekje weir, which have the controlgates with the type of lift gate.
机译:进行该研究以通过可移动堰中的控制栅极模拟OUTFL OWS 使用流动3D模型,即三维数值水力模型。通过A. 位于Geum River盆地的Baekje Weir的实验,测得的Outfl OWS 与通过每个分析获得的模拟Outfl OWS进行比较 流动3D模型中的湍流模型。开放的堰排放评级表 通过验证下游的边界条件提供控制栅极速率。 通过开放式控制速率来选择模拟OUTFL OWS的适当湍流模型 门,将测量的Outfl实验与模拟结果进行比较 通过每个湍流模型,由混合长度模型组成,一个方程湍流 能量模型,κ-ε模型,RNG(重新成型组理论)模型,LES(大涡 模拟模型。从上面的结果,RNG模型被发现到最佳湍流 模型通过Baekje Weir中的控制门来模拟Outfl OWS,具有控制 与升降门的类型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号