首页> 外文会议>IEEE Student Conference on Research and Development >New compact design of dual notched bands UWB antenna with slots in radiating and feeding elements
【24h】

New compact design of dual notched bands UWB antenna with slots in radiating and feeding elements

机译:新型双缺口UWB天线的紧凑设计,在辐射和馈电元件中均设有槽

获取原文

摘要

In this paper, a new design of ultra-wideband printed elliptical monopole antenna is presented. The proposed antenna operates over a wideband from 2.75 to 15.3 GHz for voltage standing wave ratio (VSWR) less than two. Two modifications are introduced to enhance the impedance bandwidth of the proposed elliptical monopole antenna. The first one is to chamfer the edges of the ground plane with a radius of 5 mm. The second modification is to shift the patch and the feeder line. A dual band notched characteristics were achieved by utilizing symmetrical L-shaped slot and an inverted U-shaped slot inserted in the radiating patch and in the feed line respectively. These bands are 3-4 GHz and 5-6 GHz used for WiMAX and WLAN operations. The length and the width of the slots dominate on the center frequency and the width of the notch bands. The proposed antenna shows several advantages compared with other recently proposed band notch antennas with its compact size, simple structure, wide bandwidth, good band-notch characteristic, omni-directional radiation pattern and acceptable gain. The proposed antenna simulation results are obtained and optimized using a commercial electromagnetic simulator CST Microwave Studio.
机译:本文提出了一种新的超宽带印刷椭圆形单极天线设计。所提出的天线以2.75至15.3GHz的宽带操作,电压驻波比(VSWR)小于两个。引入了两种修改以增强所提出的椭圆形单极天线的阻抗带宽。第一个是将地平面的边缘倒角,半径为5mm。第二种修改是将贴片和馈线换档。通过利用对称的L形槽和插入辐射贴片和进料管线中的倒U形槽来实现双频带缺口特性。这些频段是3-4 GHz和5-6 GHz用于WiMAX和WLAN操作。槽的长度和宽度在中心频率和凹口带的宽度上占主导地位。拟议的天线与其他最近提出的频段陷波天线相比,具有紧凑尺寸,结构简单,带宽,良好的带 - 缺口特性,全向辐射图案和可接受的增益相比,与其他最近提出的乐队陷波天线相比,有几个优点。使用商用电磁模拟器CST微波工作室获得并优化所提出的天线仿真结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号