首页> 外文会议>USNC-URSI Radio Science Meeting >Single notched-band UWB antenna for WLAN environment using complementary split ring resonators CSRR and spiral resonator CSR
【24h】

Single notched-band UWB antenna for WLAN environment using complementary split ring resonators CSRR and spiral resonator CSR

机译:使用互补分体环谐振器CSRR和螺旋谐振器CSR的用于WLAN环境的单个缺口带UWB天线

获取原文

摘要

Ultra-wide band (UWB) technology has become more popular due to various applications such as ground penetrating radar, medical imaging and sensor networks. The antenna is one of the key components of UWB systems and has drawn much attention in recent years. In this paper we propose the design of UWB monopole antenna, providing single notched-band for WLAN (5–6) GHz to avoid interference signals, using complementary split ring resonators CSRR and spiral resonator CSR. It consists of a microstrip patch with modified radiating element and ground plane, while the desired notch-band characteristic is achieved by etching separately CSRR and SCR in the radiating patch, in Fig.1. Investigations on the parameters of the CSRR were performed to obtain the same performance of CSR in high frequency keeping away it second resonance. Fig.2 shows simulated and measured return loss of proposed single notched-band UWB monopole antennas, compared to the antenna without filtering property. It can be seen that the monopole antenna covers the whole UWB band (3–11 GHz) with a good rejection of WLAN band for notched-band antennas. Also a good response is observed in high frequency of UWB band. for the antennas gain, it varies between 3dBi and 5 dBi. From it performances, The proposed antennas are a good candidate for UWB applications where notch-band for WLAN is required. All results indicate that the investigated CSSR works effectively to introduce a single notch-band characteristic for the UWB antenna, like CSR performances.
机译:由于地面穿透雷达,医学成像和传感器网络等各种应用,超宽带(UWB)技术变得更加流行。天线是UWB系统的关键组件之一,近年来绘制了很多关注。在本文中,我们提出了UWB单极天线的设计,为WLAN(5-6)GHz提供单个缺口带,以避免使用互补分体环谐振器CSRR和螺旋谐振器CSR。它由具有改进的辐射元件和接地平面的微带贴片组成,而通过在图1中蚀刻CSRR和SCR,通过在辐射贴片中蚀刻来实现所需的凹凸带特性。进行对CSRR参数的调查,以获得高频的CSR的相同性能,从而保持其第二谐振。图2示出了与未过滤特性的天线相比,示出了所提出的单个缺口带UWB单极天线的模拟和测量的回波损耗。可以看出,单极天线覆盖整个UWB频带(3-11GHz),良好地拒绝用于缺口带天线的WLAN频带。在UWB带的高频中也观察到良好的反应。对于天线增益,它在3DBI和5 dbi之间变化。从IT表演中,所提出的天线是用于WLAN的缺口带的UWB应用的良好候选者。所有结果表明,调查的CSSR有效地为UWB天线引入了单一的凹槽带特性,如CSR性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号