首页> 外文会议>International conference on Frontiers of advanced materials and engineering technology >The Effect of Ultrasonic Etching on the Structure of Stabilized PAN Fibers
【24h】

The Effect of Ultrasonic Etching on the Structure of Stabilized PAN Fibers

机译:超声刻蚀对稳定PAN纤维结构的影响

获取原文

摘要

The effect of ultrasonic etching on the crystalline structure,fibrillar structure,skin-core structure of stabilized PAN fibers was studied by XRD and SEM.It has been found various degree of decrease occurs in the crystallite size and crystallinity of fibers heated at different temperatures after ultrasonic etching.Fibrillar structure of fibers heated at 195°C~245°C appear after ultrasonic etching in 90wt% DMSO solution for 6h.When the stabilization temperature is over 245°C,no separated fibrils or macrofibrils are found.When stabilized fibers were etched in pure DMSO,skin-core morphology was observed for the fibers heated at 235°C~265°C.The method of ultrasonic etching using pure DMSO confirms the structural difference between the skin and the core,also makes the difference visual.
机译:通过XRD和SEM研究了超声刻蚀对稳定PAN纤维的晶体结构,原纤结构,皮芯结构的影响,发现在不同温度下加热后的纤维的微晶尺寸和结晶度都有不同程度的降低。在90wt%的DMSO溶液中进行6h超声刻蚀后,加热到195°C〜245°C的纤维呈纤维状结构。当稳定温度超过245°C时,未发现分离的原纤维或大纤维。在纯DMSO中腐蚀后,观察到在235℃〜265℃下加热的纤维具有皮芯形貌。采用纯DMSO进行超声波腐蚀的方法证实了皮与芯之间的结构差异,也使外观可见。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号