首页> 外文会议>Conference on millimeter, submillimeter, and far-infrared detectors and instrumentation for astronomy VI >Feedhorn-coupled TES polarimeter camera modules at 150 GHz for CMB polarization measurements with SPTpol
【24h】

Feedhorn-coupled TES polarimeter camera modules at 150 GHz for CMB polarization measurements with SPTpol

机译:150 GHz的Feedhorn耦合TES偏振计相机模块,用于使用SPTpol进行CMB偏振测量

获取原文
获取外文期刊封面目录资料

摘要

The SPTpol camera is a dichroic polarimetric receiver at 90 and 150 GHz. Deployed in January 2012 on the South Pole Telescope (SPT), SPTpol is looking for faint polarization signals in the Cosmic Microwave Background (CMB). The camera consists of 180 individual Transition Edge Sensor (TES) polarimeters at 90 GHz and seven 84-polarimeter camera modules (a total of 588 polarimeters) at 150 GHz. We present the design, dark characterization, and in-lab optical properties of the 150 GHz camera modules. The modules consist of photolithographed arrays of TES polarimeters coupled to silicon platelet arrays of corrugated feedhorns, both of which are fabricated at NIST-Boulder. In addition to mounting hardware and RF shielding, each module also contains a set of passive readout electronics for digital frequency-domain multiplexing. A single module, therefore, is fully functional as a miniature focal plane and can be tested independently. Across the modules tested before deployment, the detectors average a critical temperature of 478 mK, normal resistance iRsubN/sub/i of 1.2Ω , unloaded saturation power of 22.5 pW, (detector-only) optical efficiency of ~ 90%, and have electrothermal time constants & 1 ms in transition.© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
机译:SPTpol摄像机是90和150 GHz的分色偏振接收器。 SPTpol于2012年1月部署在南极望远镜(SPT)上,正在寻找宇宙微波背景(CMB)中微弱的偏振信号。该摄像机由90个GHz的180个单独的过渡边缘传感器(TES)旋光仪和150 GHz的七个84旋光仪摄像头模块(共588个偏振计)组成。我们介绍了150 GHz摄像头模块的设计,暗特性和实验室内的光学特性。该模块由TES旋光仪的光刻阵列与波纹状馈源的硅片阵列耦合而成,两者均在NIST-Boulder制造。除了安装硬件和RF屏蔽外,每个模块还包含一组用于数字频域多路复用的无源读出电子设备。因此,单个模块可以完全用作微型焦平面,并且可以独立进行测试。部署前,在经过测试的所有模块中,探测器的平均临界温度为478 mK,法向电阻 R N 为1.2Ω。 ,22.5 pW的空载饱和功率,(仅用于检测器的)光学效率约为90%,并且电热时间常数<过渡过程中需要1毫秒。©(2012)版权:光电仪器工程师协会(SPIE)。摘要的下载仅允许个人使用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号