首页> 外文会议>2011 19th Iranian Conference on Electrical Engineering >A highly-linear modified pseudo-differential current starved delay element with wide tuning range
【24h】

A highly-linear modified pseudo-differential current starved delay element with wide tuning range

机译:具有宽调谐范围的高线性修改型伪微分电流不足延迟元件

获取原文

摘要

This paper describes an efficient structure of apseudo-differential current starved delay element that is used in a four stages delay line targeted for analog/mixed Delay-Locked-Loops. The designed circuit has been simulated in ADS software, using TSMC 0.18 um CMOS process at 1.5V supply voltage. Body feed technique is used to widen applicable range of control voltage. The linearity of circuit is, also, improved compared to the conventional current starved delay elements. Moreover, improving the noise performance is achieved by taking advantage of differential structure. The simulation results indicate that tunable delay range of proposed delay cell is within 0.26–1.6 ns. Sweeping the control voltage from 0 to 1.2 V at 350 MHz, the calculated gain is almost 1.11ns/V. The operation frequency range of the four stages delay line is 180 to 500 MHz. While operating at 350 MHz, the peak-to-peak and rms jitters are 9.5 and 32 ps, respectively, and the maximum power consumption in this frequency is 0.4 mW.
机译:本文描述了伪差分电流不足延迟元件的有效结构,该元件用于模拟/混合延迟锁定环路的四级延迟线。设计的电路已在ADS软件中进行了仿真,在1.5V电源电压下使用TSMC 0.18 um CMOS工艺。体馈电技术用于扩大控制电压的适用范围。与传统的电流不足的延迟元件相比,电路的线性也得到了改善。此外,通过利用差动结构来实现改善的噪声性能。仿真结果表明,所提出的延迟单元的可调延迟范围在0.26-1.6 ns之内。在350 MHz下将控制电压从0扫描到1.2 V,计算出的增益几乎为1.11ns / V。四级延迟线的工作频率范围是180到500 MHz。当工作在350 MHz时,峰峰值抖动和均方根抖动分别为9.5和32 ps,该频率下的最大功耗为0.4 mW。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号