首页> 外文会议>Conference on physics of medical imaging >A preclinical SPECT camera with depth-of-interaction compensation using a focused-cut scintillator
【24h】

A preclinical SPECT camera with depth-of-interaction compensation using a focused-cut scintillator

机译:临床前SPECT相机,使用聚焦切割闪烁体进行互动深度补偿

获取原文

摘要

Preclinical SPECT offers a powerful means to understand the molecular pathways of metabolic activity in animals. SPECT cameras using pinhole collimators offer high resolution that is needed for visualizing small structures in laboratory animals. One of the limitations of pinhole geometries is that increased magnification causes some rays to travel through the scintillator detector at steep angles, introducing parallax errors due to variable depth-of-interaction in the scintillator, especially towards the edges of the detector field of view. These parallax errors ultimately limit the resolution of pinhole preclinical SPECT systems, especially for higher energy isotopes that can easily penetrate through millimeters of scintillator material. A pixellated, focused-cut scintillator, with its pixels laser-cut so that they are collinear with incoming rays, can potentially compensate for these parallax errors and thus open up a new regime of sub-mm preclinical SPECT. We have built a 4-pinhole prototype gamma camera for preclinical SPECT imaging, using an EMCCD camera coupled to a 3 mm thick CsI(Tl) scintillator whose pixels are focused towards each 500 靘-diameter pinhole aperture of the four pinholes. The focused-cut scintillator was fabricated using a laser ablation process that allows for cuts with very high aspect ratios. We present preliminary results from our phantom experiments.
机译:临床前SPECT提供了一种强大的方法,以了解动物中代谢活性的分子途径。使用针孔准直器的SPECT相机提供高分辨率,以便在实验室动物中可视化小结构。针孔几何形状的局限之一是增加的放大率导致一些光线以陡峭的角度穿过闪烁体检测器,引起视差误差由于闪烁体中的可变深度相互作用,尤其是朝向探测器视场的边缘。这些视差误差最终限制了针孔临床前SPECT系统的分辨率,特别是对于能够容易地穿过毫米闪烁体材料的更高能量同位素。像素化的聚焦切割的闪烁体,其像素激光切割,使它们与进入光线相连,可以潜在地补偿这些视差误差,从而打开亚mm临床前Spect的新制度。我们已经建立了一个用于临床前的SPECT成像的4针孔原型伽马摄像头,使用耦合到3 mm厚的CSI(TL)闪烁体的EMCCD相机,其像素聚焦为每个500°-Diameter针孔孔的四个针孔。使用激光烧蚀过程制造聚焦切割的闪烁体,其允许具有非常高的纵横比的切割。我们提出了我们的幻影实验的初步结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号