首页> 外文会议>ASME Joint US-European Fluids Engineering Division summer meeting;FEDSM2010 >TUBE BANKS HEAT TRANSFER ENHANCEMENT USING CONICAL FINS
【24h】

TUBE BANKS HEAT TRANSFER ENHANCEMENT USING CONICAL FINS

机译:使用圆锥形翅片增强管束传热

获取原文

摘要

In this work the heat transfer and pressure drop experimental results obtained in a two step finned tube bank with conical fins are presented. The tube bank had an equilateral triangle array composed of nine finned tubes with conical fins inclined 45 degrees in respect with the tube axis. The heat exchange external area of a single tube is approximately 0.07 m~2. All necessary thermal parameters, inlet/outlet temperatures, mass flows, for the heat balance in the tube bank were determined for different air velocities, Re = 3400 - 18400, and one constant thermal charge provided by a hot water flow with a temperature of 80 °C. As a result, the correlations for the heat transfer and pressure drop calculation were obtained. The experimental results were compared against the analytical results for a tube bank with annular fins with the same heat exchange area. It was found that the proposed tube bank using finned tubes with conical fins shows an increment of heat transfer up to 58%.
机译:在这项工作中,介绍了在带有锥形翅片的两步翅片管束中获得的传热和压降实验结果。管束具有由九个翅片管组成的等边三角形阵列,该九个翅片管具有相对于管轴倾斜45度的圆锥形翅片。单管的换热面积约为0.07 m〜2。对于不同的空气流速,Re = 3400-18400,以及由温度为80的热水流提供的恒定热量,确定了所有必要的热参数,入口/出口温度,质量流量,以用于管束中的热平衡。 ℃。结果,获得了用于传热和压降计算的相关性。将实验结果与具有相同热交换面积的环形翅片的管束的分析结果进行了比较。已经发现,所建议的使用带有锥形翅片的翅片管的管束显示出高达58%的热传递增量。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号