首页> 外文会议>ASME InterPack conference;IPACK2009 >DEVELOPMENT OF A LOW-NOISE AND HIGH-PERFORMANCE COOLING STRUCTURE FOR FULL-HD PLASMA DISPLAY TV SETS
【24h】

DEVELOPMENT OF A LOW-NOISE AND HIGH-PERFORMANCE COOLING STRUCTURE FOR FULL-HD PLASMA DISPLAY TV SETS

机译:全高清等离子显示电视机低噪声高性能冷却结构的开发

获取原文

摘要

A low-noise and high-performance "inclined fan-blowing-upward structure" for full high definition plasma display panel television sets was developed by using computational fluid dynamics with heat transfer based on a Cartesian grid system. In the conventional structure, the plasma panel and boards are cooled by fans and upward flow induced by natural convection. However, simulation results indicated that low-temperature flows between the bottom and rear inlets and fans are formed along the back cover, and the flows are not sufficiently supplied to the plasma panel and address-driver modules. Our solution is to mount the cooling fans inclined to the plasma panel so that the flows produced by the fans impinge on the panel to supply the low-temperature air to the panel and address-driver modules directly. In the new structure, larger fans can be used because fans are mounted inclined. With the larger fans, the rotation speed of the fans can be reduced, and the flow rate is increased. The experimental results show that the temperature of the panel and address-driver modules decreases respectively 3C and 8C at the same noise output level.
机译:通过使用基于笛卡尔网格系统的具有传热功能的计算流体动力学,开发出了一种用于全高清等离子显示面板电视机的低噪声,高性能的“倾斜风扇向上吹动结构”。在常规结构中,等离子板和板由风扇冷却,并由自然对流引起向上流动。然而,模拟结果表明,底部和后部入口与风扇之间的低温流动是沿着后盖形成的,并且这些流动没有充分地提供给等离子面板和地址驱动器模块。我们的解决方案是将冷却风扇安装在等离子面板上,以使风扇产生的气流撞击到面板上,从而将低温空气直接提供给面板和地址驱动器模块。在新结构中,由于风扇倾斜安装,因此可以使用更大的风扇。对于较大的风扇,可以降低风扇的转速,并增加流量。实验结果表明,在相同的噪声输出水平下,面板和地址驱动器模块的温度分别降低了3C和8C。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号