首页> 外文会议>2010 International Conference on Mechanic Automation and Control Engineering >Application of yttrium in AZ61 magnesium alloy and the semi-solid AZ61 alloy
【24h】

Application of yttrium in AZ61 magnesium alloy and the semi-solid AZ61 alloy

机译:钇在AZ61镁合金和半固态AZ61合金中的应用

获取原文

摘要

The semi-solid magnesium alloy slurry was prepared by a newly self-developed mechanical stirring machine for preparing continuous semi-solid slurry, the effects of rare earth elements yttrium on the ignition point, the casting microstructure, the semi-solid microstructure and mechanical properties of AZ61 magnesium alloy were studied in this paper. The experimental results showed that increasing the Y content would increase the ignition poin; when the Y content were 1.0% the ignition point of magnesium alloy was raised 36 °C, the effect refining grain size of the casting alloy was the best, and its mechanical properties were the best, the tensile strength of magnesium alloy AZ61-1.0%Y was raised 13.5% than that AZ61 magnesium alloy, also its elongation was raised 17.8% than that AZ61 magnesium alloy, the semi-solid microstructure was the smaller, symmetrically and rounded grain.
机译:用新型自行研制的机械搅拌机制备半固态镁合金浆料,制备连续的半固态浆料,稀土元素钇对着火点,铸造组织,半固态组织和力学性能的影响。本文研究了AZ61镁合金的制备方法。实验结果表明,增加Y含量会增加点火点。当Y含量为1.0%时,镁合金的着火点提高36°C时,铸造合金的细化晶粒效果最好,其机械性能最佳,镁合金AZ61-1.0%的拉伸强度Y比AZ61镁合金提高了13.5%,伸长率也比AZ61镁合金提高了17.8%,半固态组织是较小的,对称且圆润的晶粒。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号