首页> 外文会议>American Filtration and Separations Society annual meeting >EFFECTS OF BIODIESEL BY-PRODUCTS ON INTERFACIAL TENSION AND WATER SEPARATION PROPERTIES OF BIODIESEL-ULTRA LOW SULFUR DIESEL BLENDS
【24h】

EFFECTS OF BIODIESEL BY-PRODUCTS ON INTERFACIAL TENSION AND WATER SEPARATION PROPERTIES OF BIODIESEL-ULTRA LOW SULFUR DIESEL BLENDS

机译:生物柴油副产物对生物柴油-超低硫柴油共混物界面张力和水分离性能的影响

获取原文

摘要

Triglycerides react with methanol in the presence of sodium or potassium hydroxide catalysts to produce fatty acid methyl esters (FAME), or biodiesel and glycerol. This process does not usually go to 100 % conversion and contamination of biodiesel by fatty acids, methanol, and glycerol, as well as incompletely reacted mono-, di-, and tri-glycerides, cannot be avoided. The presence of biodiesel in fuel blends has an established negative impact on the ability of commercial fuel-water separation devices to remove water from diesel fuel. This is expected, as biodiesel is a surfactant, and surfactants enhance emulsion stability. However, biodiesels from differing manufacturing processes and raw material sources have been found to exert varying levels of negative impact on water separation. This variation suggests that other species within the biodiesel may be responsible for some of the emulsion-stabilizing properties; and these species affect the interfacial tension (IFT) and water separation properties of the blend. The work presented here investigated the influence of raw materials and reaction by-products from the biodiesel manufacturing process on the interfacial tension of biodiesel and ultra low sulfur diesel blends. In addition, the impact of these contaminants on the performance of fuel water separation media in biodiesel and ultra low sulfur diesel blends was studied. Hence, results of the work target development of biodiesel composition/quality standards that are sensitive to filtration and separation needs of the diesel engine. A series of B20 and B40 samples were created with varying levels of fatty acid, mono-glyceride and glycerin. Mono-glyceride was found to have greatest impact on IFT, lowering the IFT of Ultra Low Sulfur Diesel (ULSD) and biodiesel blends 55%. Fatty acids were found to have minimal impact on IFT and water separation measured in flat sheet SAE J1488 tests.
机译:甘油三酸酯在氢氧化钠或氢氧化钾催化剂的存在下与甲醇反应,生成脂肪酸甲酯(FAME)或生物柴油和甘油。此过程通常不会达到100%的转化率,无法避免脂肪酸,甲醇和甘油对生物柴油的污染,以及未完全反应的甘油单酯,甘油二酯和甘油三酯的污染。燃料混合物中生物柴油的存在对商业燃料-水分离装置从柴油中去除水的能力具有确定的负面影响。这是可以预期的,因为生物柴油是一种表面活性剂,而表面活性剂可增强乳液的稳定性。然而,已经发现来自不同制造工艺和原材料来源的生物柴油对水分离产生不同程度的负面影响。这种变化表明,生物柴油中的其他物质可能是某些乳液稳定特性的原因。这些物质会影响共混物的界面张力(IFT)和水分离性能。本文介绍的工作研究了生物柴油生产过程中原材料和反应副产物对生物柴油和超低硫柴油混合物的界面张力的影响。此外,还研究了这些污染物对生物柴油和超低硫柴油混合物中燃料水分离介质性能的影响。因此,工作结果的目标是开发对柴油发动机的过滤和分离需求敏感的生物柴油成分/质量标准。创建了一系列B20和B40样品,其中包含不同含量的脂肪酸,甘油单酯和甘油。发现甘油单酸酯对IFT的影响最大,将超低硫柴油(ULSD)和生物柴油混合物的IFT降低了55%。在平板SAE J1488测试中,发现脂肪酸对IFT和水分离的影响最小。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号