首页> 外文会议>Offshore technology conference >Vigdis Booster Station - Next Generation Booster Project
【24h】

Vigdis Booster Station - Next Generation Booster Project

机译:Vigdis Booster Station - 下一代助推器项目

获取原文

摘要

The Vigdis Booster station project was sanctioned in November 2018. It is the first project in Equinor' s project portfolio which has implemented the standardization principles for subsea booster stations. The Vigdis Subsea Bosting System (North Sea) is currently in execution. This will be the first multiphase boosting system with all electric control system and in addition we are also producing to and controlling the system from two different hosts. The pump is using the new HV motor, simplifying and reducing costs of the system. The boosting system will comprise of a foundation structure with trawl protection, a manifold module for connection to flow lines, a boosting pump module and an umbilical termination assembly. Production on the Vigdis Field is currently limited by the capacity in the production lines and pressure drop across the topside chokes. Reservoir deliverability is limited by low reservoir pressure in some parts of the field, together with increasing water cut, leading to reduced energy into the system i.e. dropping wellhead pressures. Pressure support for the reservoirs is provided by the aquifers and by water injection. One Subsea's scope is to engineer, procure and construct (EPC) a Pump Station including a Manifold Foundation and Protection structure and a Pump System including topside equipment, umbilical and the pump module. The Vigdis Booster Station (VBS) will be tied into the LP and HP-lines from Vigdis B template to Snorre A (SNA) unit. In addition, the production from H template will be tied in as well as provisions for tie-in of a future prospect. Power to the booster station will be supplied from Snorre B (SNB) via an 18 km power umbilical being hung off from a slot on the existing riser balcony at the south east corner of installation. The solution is based on an All-Electric control system eliminating need for hydraulic lines for control. Another feature in the Vigdis subsea pump solution is to apply an 8.7 KV HV motor and thereby eliminate the need for subsea transformer and reducing investment cost benchmarked to similar subsea projects.
机译:Vigdis Booster Station项目于2018年11月被批准。它是EquInor项目组合的第一个项目,该项目已实施海底助推器的标准化原则。 Vigdis Heafea Bosting System(北海)目前正在执行。这将是具有所有电控系统的第一多相提升系统,此外我们还生产和控制来自两个不同主机的系统。泵使用新的HV电机,简化和降低了系统的成本。升压系统将包括具有拖网保护的基础结构,用于连接到流线的歧管模块,升压泵模块和脐带终端组件。 VIGDIS领域的生产目前受到生产线的能力和跨越顶部窒息的压力下降的限制。储存器可递送性受到该领域某些部分的低储层压力的限制,以及增加水切割,导致系统进入系统中的能量。含水层的压力支撑由含水层和注水。一个海底的范围是工程师,采购和构建(EPC)泵站,包括歧管基础和保护结构以及包括顶部设备,脐带和泵模块的泵系统。 Vigdis Booster Station(VBS)将与Vigdis B模板绑到LP和HP线中,以赋予卵子A(SNA)单位。此外,H模板的生产将被捆绑在一起,以及捆绑未来前景的规定。加强站的电源将通过锡尔利B(SNB)提供一台18公里的电源脐带,从现有的立口阳台上挂在安装的东南角。该解决方案基于全电动控制系统,消除了用于控制的液压线的需求。 Vigdis海底泵解决方案中的另一个特征是应用8.7 kV HV电机,从而消除对海底变压器的需求,并将投资成本降低到类似的海底项目。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号