Wear and Corrosion Behavior of HVOF-Sprayed WC-CoCr Coatings on Al Alloys

摘要

WC-CoCr coatings were HTVOF-sprayed onto an AA6082T6 substrate. Thickness values between 50 and 150μm were produced by stepwise increase of the number of torch scans. This increase made the coatings not only thicker but also denser. This was due both to peening effects and by modifications to the splat formation mechanism, investigated by focused ion beam technique. Thanks to such densification, the hardness, the wear and impact resistance, and the corrosion protectiveness of the layers increased with the number of torch scans. The largest improvement occurred from 2 to 3 torch scans. These coatings were also compared to anodized films: cermets had superior wear and impact resistance but offered less corrosion protection.