首页> 外文会议>Conference on intense microwave pulses >X-Band klystron development at the Stanford Linear Accelerator Center
【24h】

X-Band klystron development at the Stanford Linear Accelerator Center

机译:斯坦福线性加速器中心的X波段速调管开发

获取原文

摘要

X-band klystrons capable of 75 MW and utilizing either solenodidal or Periodic Permanent Magnet (PPM) focusing are undergoing design, fabrication and testing at the Stanford Linear Accelerator Center (SLAC). The klystron development is part of an effort to realize components necessary for the construction of the Next Linear Collider (NLC). SLAC has completed a solenoidal-focused X-band klystron development effort to study the design and operation of tubes with beam microoperveances of 1.2. As of early 2000, nine 1.2 mu K klystrons have been tested to 50 MW at 1.5 mu s. The first 50 MW PPM klystron, constructed in 1996, was designed with a 0.6 mu K beam at 465 kV and uses a 5-cell traveling-wave output structure. Recent testing of this tube at wider pulsewidths has reached 50 MW at 55 percent efficiency, 2.4 mu s and 60 Hz. A 75 MW PPM klystron prototype was constructed in 1998 and has reached the NLC design target of 75 MW at 1.5 mu s. A new 75 MW PPM klystron design, which is aimed at reducing the cost and increasing the reliability of multi-megawatt PPM klystrons, is under investigation. The tube is scheduled for testing during early 2001.
机译:容量为75 MW的X波段速调管正在利用螺线管或周期性永磁体(PPM)聚焦,正在斯坦福线性加速器中心(SLAC)进行设计,制造和测试。速调管的开发是实现Next Next Linear Collider(NLC)构造所必需的组件的一项工作。 SLAC已完成了针对螺线管的X波段速调管的开发工作,以研究光束微通量为1.2的电子管的设计和操作。截至2000年初,已经测试了9个1.2μK K速调管在1.5μs时的功率为50 MW。第一个50 MW PPM速调管建于1996年,设计时采用465 kV电压下的0.6μK光束,并采用5单元行波输出结构。最近在更宽的脉冲宽度上对该管进行的测试已达到50 MW,效率为55%,2.4μs和60 Hz。 1998年建造了75 MW PPM速调管原型,并在1.5 s s时达到了75 MW的NLC设计目标。目前正在研究一种新的75 MW PPM速调管设计,该设计旨在降低成本并提高多兆瓦PPM速调管的可靠性。该管计划于2001年初进行测试。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号