首页> 外文会议>ASME design engineering technical conferences;Biennial conference on mechanical vibration and noise >Theoretical and experimental finite forced dynamics of a cantilever beam: dynamic instability and modal coupling
【24h】

Theoretical and experimental finite forced dynamics of a cantilever beam: dynamic instability and modal coupling

机译:悬臂梁的理论和实验有限强迫动力学:动态不稳定性和模态耦合

获取原文

摘要

The 3-d dynamics of a cantilever beam undergoing large displacements under a sinusoidally varying, concentrated, vertical force at its free end is analyzed. The pde's of the motion are obtained by using the Hamilton principle and then a reduced 3 degree-of-freedom model is obtained using in a Galerkin discretization, three eigenfunctions of the linearized model. A path following procedure is used to describe the global dynamic behavior in the excitation control parameter plane. The results obtained using the simple 3 d.o.f. analytical model are then compared with those of an experimetnal steel model of the cantilever. The regions of instability of the unimodal planar solution in which the nonlinear modal cou0ling excites the torsional component are studied; the planar motion usually looses stability via Hopf bifurcations after which quasi-periodic and/or chaotic motions are found. Inside the regions in which the system shows a complex time-evolution the complexity-level of the response is analyzed using, for the experimental model, a time series analysis tool.
机译:分析了悬臂梁在自由端正弦变化,集中,垂直力作用下发生大位移的三维动力学。通过使用汉密尔顿原理获得运动的pde,然后在Galerkin离散化中使用线性化模型的三个本征函数来获得简化的3自由度模型。遵循路径的过程用于描述励磁控制参数平面中的全局动态行为。使用简单的3 d.o.f.然后将分析模型与悬臂的实验钢模型进行比较。研究了非线性模态耦合激励扭转分量的单峰平面解的不稳定性区域。平面运动通常会由于Hopf分叉而失去稳定性,此后会发现准周期运动和/或混沌运动。在系统显示复杂时间演化的区域内部,使用时间序列分析工具对实验模型分析响应的复杂性级别。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号