首页> 外文会议>Iranian Conference on Electrical Engineering >Signal Folding Improvement in N-Path Filters by Programmable Switched-LC Band-Stop Pre-Filtering
【24h】

Signal Folding Improvement in N-Path Filters by Programmable Switched-LC Band-Stop Pre-Filtering

机译:通过可编程开关LC带阻预滤波改善N路径滤波器中的信号折叠

获取原文

摘要

In this paper, a method for signal folding improvement in N-path filters is presented. By applying a new technique based on pre-filtering to a former structure, the difference in gain between the desired signal and folded harmonics increases. The proposed N-path filter also performs single-ended to differential conversion to reject harmonic selectivity around even harmonics. The new structure, which is simulated using 90nm technology, has a frequency tuning range of 800MHz that varies from 1.3GHz to 2.1GHz. The input impedance matching and NF are, respectively, less than -10dB and 4.6dB in the entire frequency range. The in-band IIP3 is better than 5dBm, and the power consumption of the non-ideal clock generator varies from 2.9mW to 4.8mW depending on the filter center frequency.
机译:本文提出了一种改善N路径滤波器信号折叠的方法。通过将基于预滤波的新技术应用于以前的结构,所需信号和折叠谐波之间的增益差异会增加。提出的N路径滤波器还执行单端到差分转换,以拒绝偶次谐波附近的谐波选择性。采用90nm技术模拟的新结构具有800MHz的频率调谐范围,从1.3GHz到2.1GHz不等。在整个频率范围内,输入阻抗匹配和NF分别小于-10dB和4.6dB。带内IIP3优于5dBm,并且非理想时钟发生器的功耗根据滤波器中心频率在2.9mW至4.8mW之间变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号