首页> 外文会议>International conference on nuclear engineering >Preliminary Analysis of Hydrogen Distribution during Severe Accident induced by Loss of Coolant Accident
【24h】

Preliminary Analysis of Hydrogen Distribution during Severe Accident induced by Loss of Coolant Accident

机译:冷却液流失事故引起的严重事故中氢分布的初步分析

获取原文

摘要

During hypothetical severe accidents in nuclear power plants, a large amount of hydrogen is generated rapidly as a result of Zirconium-Steam reaction and released into the containment. Hydrogen mixes with air and may come into combustion or detonation under proper conditions, which threatens the integrity of containment. Therefore, getting detailed hydrogen flow and distribution in various physical mechanisms is a key issue to resolve the hydrogen risk in containment and compartments. To study local hydrogen distribution in the containment of advanced passive PWR, an analysis model is built by 3-dimensional CFD code. Computational domain is divided by structured grid which contains over 100,000 cells, the shape and surface area of walls and obstacles of steel shell and internal structure, which have great impact on gas flow and heat transfer, are included. Hydrogen distribution in containment simulating with different turbulence models is studied, the result shows that during large amount of hydrogen release stage. In hydrogen distribution result simulating with algebraic model, hydrogen is all gathered in the dome and the peak concentration reaches 17%. When k-e model is adopted, the peak concentration in the dome is 8%, hydrogen stratification is established in whole large space. Besides, hydrogen distribution near source also shows algebraic model cannot simulate turbulence diffusion in local compartment. It is more reasonable choosing k-e model to study hydrogen behavior in containment. Based on adopted k-ε model, the effect of steam on hydrogen distribution is investigated. With steam injection, the hydrogen distribution is more homogeneous in upper space and average concentration is lower. In local compartment, due to diffusion enhanced by steam, the hydrogen concentration is higher in the bottom.
机译:在假设的核电站严重事故中,锆-蒸汽反应会迅速产生大量氢气,并将其释放到安全壳中。氢与空气混合,在适当条件下可能燃烧或爆炸,从而威胁到安全壳的完整性。因此,获得详细的氢在各种物理机制中的流动和分布是解决安全壳和隔室中氢风险的关键问题。为了研究高级无源压水堆中氢的局部分布,通过三维CFD代码建立了分析模型。计算域由包含100,000多个单元的结构化网格划分,其中包括壁的形状和表面积以及钢壳和内部结构的障碍物,它们对气体流动和传热有很大的影响。研究了在不同湍流模型下安全壳中的氢分布,结果表明在大量的氢释放阶段。在用代数模型模拟的氢分布结果中,氢都聚集在圆顶中,并且峰值浓度达到17%。当采用k-e模型时,穹顶中的峰值浓度为8%,整个大空间内都形成了氢分层。此外,氢在源附近的分布也表明代数模型不能模拟湍流在局部隔室内的扩散。选择k-e模型来研究安全壳中的氢行为更为合理。基于采用的k-ε模型,研究了蒸汽对氢分布的影响。通过蒸汽注入,氢在上部空间的分布更加均匀,平均浓度更低。在局部隔室中,由于蒸汽促进的扩散,底部的氢浓度较高。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号