Experimental Investigation of Fuel-Cooled Combustor: Cooling Efficiency and Coke Formation

摘要

Scramjet is an air-breathing engine designed to propel advanced aircrafts in the atmosphere, suitable, according to various studies, to thrust high-speed hypersonic flights (over Mach 5). The thermal protection of vehicles flying at hypersonic velocities is a critical problem; as at supersonic speeds the incoming air is at too high temperature to be used as a coolant, the fuel becomes the only adequate source of cooling for the vehicle. Regenerative cooling is a well-known cooling technique using the fuel as coolant. As the development of regeneratively cooled engines faces many difficulties, an empirical study of this cooling technology and of its complex dynamics is of high interest. In this context, a remotely controlled fuel-cooled combustor, suitable for the experimental analysis of the pyrolysis-combustion coupling characterizing a fuel-cooled combustion chamber when a hydrocarbon propellant is used, has been designed. Tests are realized under both stationary and transient conditions using ethylene as fuel and air as oxidizer. Two operating parameters, i.e. fuel mass flow rate (between 0.010 and 0.040 g.s_1) and equivalence ratio (between 1.0 and 1.5), have been investigated. It has been observed that fuel mass flow rate increases always result in the raise of the heat flux density passing from the combustion gases to the combustor walls. It has been seen that mass flow rate raises between 16 and 20 % lead to increases in the thermal energy evacuated by the fuel-coolant in the range from 30.4 to 48.5 %, depending on equivalence ratio and pressure. The dependence of the cooling system heat exchange efficiency on the two operating parameters has been demonstrated. The consequences of the coking activity of the fuel have also been investigated. For applied interest, a monitoring method for carbon deposits formation has been developed and validated.