首页> 外文会议>World biomaterials congress >Approaching the compressive modulus of articular cartilage through naturally derived cartilage matrix
【24h】

Approaching the compressive modulus of articular cartilage through naturally derived cartilage matrix

机译:通过天然衍生的软骨基质求出关节软骨的压缩模量

获取原文

摘要

Introduction: ECM-based materials are attractive for tissue engineering strategies because they can potentially aid in stem cell recruitment, cell infiltration, and cell differentiation without supplementing with additional biological factors. Although it is a relatively new biomaterial, cartilage ECM has shown potential to be chondroinductive, although in general, hydrogels composed of natural materials are often mechanically inferior to synthetic materials, which may not be ideal for load-bearing tissue applications.13! Therefore, we endeavored to create a hydrogel composed of entirely native cartilage ECM that was mechanically similar to native cartilage tissue and would promote chondrogenesis. Methods: Porcine cartilage was decellularized, solubilized, methacrylated and UV photocrosslinked to create methacrylated solubilized decellularized cartilage (MeSDCC) gels. Methacrylated gelatin (GelMA) was used as a control. Rat bone marrow stem cells were encapsulated in these networks and the constructs were cultured in vitro for 6 weeks, where chondrogenic gene expression, the compressive modulus (linear region of stress-strain curve), swelling, and histology were analyzed. Results and Discussion: One day after crosslinking, the compressive modulus of the 20% MeSDCC gels was 1069.61147.5 kPa (Fig. 1), which is similar to that reported for native cartilage tissue. Figure 1. Compressive Modulus of crosslinked hydrogels after 1 day and 6 weeks of culture. Data reported as mean + standard deviation (n=5); significantly different from 10% GelMA at same time point (p<0.05), #significantly different from 10% MeSDCC at same time point (p<0.05), &p<0.05 for specified comparison, @significantly different from same group at first time point (p<0.05), -not tested. Furthermore, when we compared the stress strain profiles of our 20% MeSDCC gels with native porcine cartilage, the stress strain profile of the 20% MeSDCC gels fell within the 95% confidence interval range of native porcine cartilage until the 20% MeSDCC gels fractured at 7.5% strain. Additionally, MeSDCC gels significantly upregulated chondrogenic genes compared to GelMA at day 1 and supported matrix synthesis as observed with Safrinin-O/Fast Green and H&E staining. Conclusion: Overall, because these gels are approaching the mechanics of native cartilage tissue and because they are supporting matrix synthesis and chondrogenic gene expression, MeSDCC hydrogels may be promising materials for cartilage tissue engineering applications, although future improvements will be necessary for fracture performance. Additionally, future work will evaluate how these gels perform in vivo.
机译:简介:基于ECM的材料对于组织工程策略很有吸引力,因为它们可以潜在地帮助干细胞募集,细胞浸润和细胞分化,而无需补充其他生物因子。尽管它是一种相对较新的生物材料,但软骨ECM已显示出软骨诱导的潜力,尽管总的来说,由天然材料组成的水凝胶在机械上通常不如合成材料,这在承重组织应用中可能不是理想的选择。13!因此,我们努力创建一种由完全天然的软骨ECM组成的水凝胶,该凝胶在机械上类似于天然的软骨组织,并会促进软骨形成。方法:对猪软骨进行脱细胞,溶解,甲基丙烯酸酯化和紫外光交联,以制备甲基丙烯酸酯化的可溶性脱细胞软骨(MeSDCC)凝胶。甲基丙烯酸甲酯(GelMA)用作对照。将大鼠骨髓干细胞封装在这些网络中,并在体外培养构建体6周,在其中分析软骨生成基因的表达,压缩模量(应力-应变曲线的线性区域),肿胀和组织学。结果与讨论:交联后的一天,20%MeSDCC凝胶的压缩模量为1069.61147.5 kPa(图1),与报道的天然软骨组织相似。图1.培养1天和6周后交联水凝胶的压缩模量。数据报告为平均值+标准偏差(n = 5);与同一时间点的10%GelMA有显着差异(p <0.05),与同一时间点的10%MeSDCC有显着差异(p <0.05),对于指定的比较,&p <0.05,@与第一个时间点的同一组显着不同(p <0.05),-未测试。此外,当我们将20%MeSDCC凝胶的应力应变曲线与天然猪软骨进行比较时,20%MeSDCC凝胶的应力应变曲线落在天然猪软骨的95%置信区间内,直到20%MeSDCC凝胶在80°C断裂。 7.5%应变。此外,与第1天的GelMA相比,MeSDCC凝胶显着上调了软骨形成基因,并通过Safrinin-O / Fast Green和H&E染色观察到支持基质合成。结论:总的来说,由于这些凝胶正接近天然软骨组织的力学,并且由于它们支持基质合成和软骨生成基因表达,因此MeSDCC水凝胶可能是有希望用于软骨组织工程应用的材料,尽管将来的改进对于骨折表现将是必要的。此外,未来的工作将评估这些凝胶在体内的表现。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号