首页> 外文会议>World biomaterials congress >Skin permeable peptide amphiphiles as novel anti-aging and anti-microbial agents
【24h】

Skin permeable peptide amphiphiles as novel anti-aging and anti-microbial agents

机译:皮肤渗透性肽两亲物作为新型抗衰老和抗微生物剂

获取原文

摘要

Introduction: One of the most predominant symptoms of skin aging is wrinkle formation. Current anti-aging and anti-wrinkle materials often induce a toxic response, which results in inflammation to increase tissue growth under the skin. Although effective, a much safer and more effective way to alleviate the effects of aging and thereby winkle formation needs to be developed. Several biomimetic peptide sequences have been identified as structural mimics of collagen type Ⅰ to be effective in stimulating the synthesis of key constituents of the extracellular matrix by fibroblasts, however, they typically suffer from poor skin penetration due to the existence of the stratum corneum. Incorporation of cell penetrating peptides has been an emerging strategy to transport a variety of cargo across cellular membranes in a dose dependent manner. In this study, peptide amphiphiles that consist of both CPPs and biomimetic sequences were designed, synthesized and characterized. The abilities of these peptide amphiphiles to penetrate the skin, to reduce inflammation, and to promote fibroblast functions were determined. Materials and Methods: Material characterization: Self-assembled peptide amphiphilic nanoparticles (APNP) were characterized by zeta potential to determine their charge, and by TEM to observe their size and morphology. Cell viability assay: To determine cell viability, human dermal fibroblasts (ATCC® PCS-200-011™) were seeded at a density of 10,000 cells/cm~2 and were subsequently co-cultured with peptide amphiphiles at various concentrations for 24 hours. MTS assays were used to determine cell density after incubation. Cell adhesion and proliferation: To determine cellular adhesion/proliferation, human dermal fibroblasts (Lonza, CC-2511) were seeded at a density of 10,000 cells/cm~2 and cultured in DMEM supplemented with 10% FBS and 1 % P/S. Cells were incubated under standard cell culture conditions for a certain period of time (4h for adhesion; 1,3, and 5 days for proliferation). The MTS assays were used to determine cell density after incubation. Bacteria growth curves: Bacteria were seeded in a 96-well plate at a density of 10~6 CFU/ml, and were then combined with varying APNP concentrations to obtain a final concentration of 0,2,4,8,12,20,40 and 80 μM. The well plate was then allowed to incubate at 37°C inside a spectrophotometer under static conditions. OD600 measurements were taken every 2 minutes for 24 hours to establish the speed of proliferation and shape of the bacterial growth curve. Skin penetration/permeation: Skin penetration and permeation were determined using the Static Franz Diffusion Cell (FD-C) with porcine skin as the membrane between donor and acceptor compartment due to their resemblance to human skin. Peptide amphiphiles were applied in the donor compartment, and PBS was used as the receptor solution. The skin samples were fixed and sectioned to examine penetration using confocal microscopy. All experiments were conducted in triplicate and repeated at least three different times. Statistical differences between means were determined using ANOVA followed by a student t-test where p < 0.01 was considered statistically significant. Results and Discussion: The LC50 value of APNPs for human dermal fibroblasts was found to be around 76 μM, and no toxicity was identified for the same cells at a concentration of up to 12 μM (Figure 1). Also, it was found that these peptide amphiphiles as low as 2 μM in concentration have the ability to both delay the time it takes for bacteria to reach exponential growth phase and decrease bacteria density after one-day of culturing for gram positive bacteria (Figure 2). The effects increased in a dose dependent manner. Last, but not least, it was found out that APNPs were able to promote fibroblast cell proliferation as well as total collagen synthesis over the long term. Conclusions: Through the above experiments, various peptide amphiphiles were identified that can be added to current skin formulations to promote the penetration of active ingredients, to increase fibroblast growth and to decrease bacteria growth, criteria necessary for improved anti-aging and antimicrobial agents.
机译:简介:皮肤老化的最主要症状之一是皱纹的形成。当前的抗衰老和抗皱材料通常会引起毒性反应,从而导致炎症,从而增加皮肤下的组织生长。尽管有效,但仍需要开发一种更安全,更有效的方法来减轻老化的影响,从而减轻眨眼的形成。几种仿生肽序列已被鉴定为Ⅰ型胶原的结构模拟物,可有效刺激成纤维细胞合成细胞外基质的关键成分,但由于角质层的存在,它们通常遭受较弱的皮肤渗透。掺入细胞穿透肽已成为一种新兴的策略,以剂量依赖性方式跨细胞膜运输多种货物。在这项研究中,由CPP和仿生序列组成的肽两亲物被设计,合成和表征。确定了这些肽两亲物渗透皮肤,减少炎症和促进成纤维细胞功能的能力。材料与方法:材料表征:自组装肽两亲性纳米颗粒(APNP)的特征在于zeta电位来确定其电荷,并通过TEM观察其大小和形态。细胞生存力测定:为了确定细胞生存力,将人真皮成纤维细胞(ATCC®PCS-200-011™)以10,000个细胞/ cm〜2的密度接种,然后与各种浓度的肽两亲物共培养24小时。孵育后,使用MTS测定法确定细胞密度。细胞粘附和增殖:为了确定细胞粘附/增殖,以10,000细胞/ cm 2的密度接种人真皮成纤维细胞(Lonza,CC-2511),并在补充有10%FBS和1%P / S的DMEM中培养。将细胞在标准细胞培养条件下孵育一定时间(粘附4h;增殖1、3和5天)。 MTS测定用于确定孵育后的细胞密度。细菌生长曲线:将细菌以10〜6 CFU / ml的密度接种到96孔板中,然后将其与不同的APNP浓度混合,以获得最终浓度0,2,4,8,12,20, 40和80μM。然后将孔板在静态条件下在分光光度计内于37°C孵育。每2分钟进行OD600测量,持续24小时,以建立增殖速度和细菌生长曲线的形状。皮肤渗透/渗透:使用静态弗朗茨扩散池(FD-C),以猪皮肤作为供体和受体区室之间的膜,因为它们与人的皮肤相似,因此可以确定皮肤的渗透和渗透率。将肽两亲物应用于供体隔室,并将PBS用作受体溶液。固定皮肤样品并切片以使用共聚焦显微镜检查渗透性。所有实验一式三份进行,并重复至少三个不同的时间。均数之间的统计学差异使用ANOVA进行确定,然后进行学生t检验,其中p <0.01被认为具有统计学意义。结果与讨论:发现人类皮肤成纤维细胞的APNPs的LC50值约为76μM,对于浓度高达12μM的相同细胞,未发现毒性(图1)。此外,还发现这些浓度低至2μM的肽两亲物既可以延迟细菌到达指数生长期所需的时间,又可以在培养革兰氏阳性细菌一天后降低细菌密度(图2 )。效果以剂量依赖性方式增加。最后但并非最不重要的一点是,发现APNP能够长期促进成纤维细胞的增殖以及总胶原蛋白的合成。结论:通过以上实验,鉴定出各种肽两亲物可以添加到当前的皮肤配方中,以促进活性成分的渗透,增加成纤维细胞生长和减少细菌生长,这是改善抗衰老和抗菌剂的必要标准。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号