首页> 外文会议>International conference on microelectronics, electromagnetics and telecommunications >Design and Analysis of Modified Circular Patch Antenna with DGS for UWB Applications
【24h】

Design and Analysis of Modified Circular Patch Antenna with DGS for UWB Applications

机译:UWB应用DGS改进圆形贴片天线的设计与分析。

获取原文

摘要

In this paper, a planar monopole antenna with modified circular patch is presented. The proposed antenna is designed to operate from 2.75 to 13.53 GHz frequency range, which covers the whole ultra-wideband (3.1-10.6 GHz). The circular patch is metallized on a FR4 dielectric substrate with a relative dielectric constant of 4.3 and is truncated at its top which is opposite to the feedline. The substrate dimensions of the modified truncated circular patch antenna (MTCPA) are taken as 36 X 36 x 1.6 mm. This antenna is excited by a 50 Ω microstrip line. A defected ground structure (DGS) with a partial ground plane is printed on the back side of the substrate to obtain UWB characteristics. The proposed antenna yields return loss of less than -10 dB (S_(11) < -10 dB), VSWR < 2, and nearly omnidirectional radiation patterns. This antenna is designed and simulated in CST Microwave Studio. This antenna is a best suitable candidate for various UWB communication systems.
机译:本文提出了一种具有改进的圆形贴片的平面单极天线。拟议中的天线设计为在2.75至13.53 GHz频率范围内工作,该频率范围覆盖了整个超宽带(3.1-10.6 GHz)。圆形贴片在FR4介电基板上被金属化,相对介电常数为4.3,并在与馈线相对的顶部被截断。修改后的截顶圆形贴片天线(MTCPA)的基板尺寸为36 X 36 x 1.6 mm。该天线由一条50Ω微带线激励。具有部分接地平面的缺陷接地结构(DGS)印刷在基板的背面,以获得UWB特性。拟议的天线产生的回波损耗小于-10 dB(S_(11)<-10 dB),VSWR <2,并且具有几乎全向的辐射方向图。该天线是在CST Microwave Studio中设计和仿真的。该天线是各种UWB通信系统的最合适的候选者。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号