首页> 外文会议>IEEE Conference on Decision and Control >Stability and causality constraints on frequency response coefficients applied for non-parametric H_(2) and H_(infinity) control synthesis.
【24h】

Stability and causality constraints on frequency response coefficients applied for non-parametric H_(2) and H_(infinity) control synthesis.

机译:施加频率响应系数的稳定性和因果关系限制,施加非参数H_(2)和H_(INFINYITY)控制合成。

获取原文

摘要

The value of norm-based control synthesis methodologies heavily depends on the quality of the model at hand. The acquisition of low-order control oriented models however is often a non-trivial task. This paper pursuits the non-parametric synthesis of optimal controllers while omitting parametrization of the plant. As a result, the actual parametrization is performed on the controller such that no data-reduction is performed without knowledge of closed-loop relevant behavior. The synthesis of frequency response coefficients of an optimal controller for a sampled version of the mixed-sensitivity problem is considered. To convexify the problem, the actual optimization is performed over the frequency response coefficients of the Youla parameter Q_(i). Using the Youla parameter, the set of stabilizing controllers is mapped onto the set of stable transfer functions. The main contribution of this paper is the derivation of algebraic constraints over Q_(i) that guarantee the existence of a rational stable interpolant over the points Q_(i). Simulations shows that the frequency response coefficients found via the proposed approach show similar behavior as model based methods.
机译:基于规范的控制合成方法的价值大大取决于手头模型的质量。然而,收购低阶控制面向模型通常是一个非琐碎的任务。本文追求最佳控制器的非参数合成,同时省略工厂的参数化。结果,在控制器上执行实际参数化,使得在不知道闭环相关行为的情况下不执行数据还原。考虑了用于混合敏感性问题的采样版本的最佳控制器的频率响应系数的合成。为了渗透问题,在Youla参数Q_(i)的频率响应系数上执行实际优化。使用YOULA参数,将该组稳定控制器映射到稳定传输功能集。本文的主要贡献是Q_(i)的代数约束的推导,以保证在点Q_(i)上的合理稳定内嵌的存在。模拟表明,通过所提出的方法发现的频率响应系数显示与基于模型的方法类似的行为。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号