首页> 外文会议>IEEE Conference on Decision and Control >Generic nonsmooth ?????? output synthesis: Tracking control with application to a coal-fired boiler/turbine unit with input dead zone
【24h】

Generic nonsmooth ?????? output synthesis: Tracking control with application to a coal-fired boiler/turbine unit with input dead zone

机译:通用不平滑??????输出综合:跟踪控制及其在输入死区的燃煤锅炉/汽轮机上的应用

获取原文

摘要

The growing share of renewables in the grid power supply has led to the increased agility requirement for the fossil-fired power plants in following the dispatch demand. This has resulted in the increased power plant robust tracking performance requirements characterized by reduced sensitivity to fuel variations and component wear and tear. The ?????? output tracking control could potentially help in addressing this problem, however the standard ?????? synthesis produces a tracking error in the plant outputs, thereby degrading the system performance. This error arises due to the fact that in boiler/turbine units, the turbine valve position actuation for manipulating steam flow rate is typically characterized by a dead zone causing small mismatch between the turbine valve command and the actual valve position. To address this deficiency as well as other similar ones arising in control systems due to the actuator nonideality, the generic nonsmooth ?????? output tracking synthesis is developed and applied to a coalfired boiler/turbine unit with input dead zone. The simulation results presented support the proposed synthesis.
机译:可再生能源在电网电源中所占份额的不断增长,导致了随着调度需求而对化石电厂的敏捷性要求不断提高。这导致了对发电厂鲁棒跟踪性能要求的提高,其特征在于对燃料变化和组件磨损的敏感性降低。这 ??????输出跟踪控制可以潜在地帮助解决此问题,但是标准??????合成会在工厂输出中产生跟踪误差,从而降低系统性能。该错误的产生是由于以下事实:在锅炉/涡轮机单元中,用于控制蒸汽流量的涡轮阀位置致动通常以死区为特征,该死区会导致涡轮阀指令与实际阀位置之间的不匹配很小。为了解决这种缺陷以及由于致动器非理想性而在控制系统中引起的其他类似缺陷,通用的非平稳性开发了输出跟踪综合,并将其应用于具有输入死区的燃煤锅炉/涡轮机。给出的仿真结果支持所提出的综合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号