首页> 外文会议>IEEE International Conference on ASIC >Cell-based programmable phase shifter design for pulsed radar SoC
【24h】

Cell-based programmable phase shifter design for pulsed radar SoC

机译:脉冲雷达SoC的基于单元的可编程移相器设计

获取原文

摘要

For a pulsed Radar SoC, the programmable phase shifter is a critical timing control unit as it dictates the “time-of-arrival”, i.e., the interval between the timing a pulse signal is launched and the timing an echo pulse is sampled. A pulsed Radar SoC often sweeps this timing parameter (from a smaller value to a larger value) to set the distance of detection of an object in a scanning fashion from the center of the Radar towards the outer regions. In this paper, we demonstrate that such a programmable phase shifter can be designed with only standard cells, while being able to control the time-of-arrival in 10,000 steps with a step size of 10ps within a wide tunable range of [0ns, 10ns]. Measurements results in a 65nm process are reported.
机译:对于脉冲雷达SoC,可编程移相器是关键的时序控制单元,因为它规定了“到达时间”,即,发出脉冲信号的时序与采样回波脉冲的时序之间的间隔。脉冲雷达SoC通常会扫描此时序参数(从较小的值到较大的值),以扫描方式设置从雷达中心到外部区域的物体检测距离。在本文中,我们证明了这样的可编程移相器可以仅使用标准单元进行设计,同时能够在[0ns,10ns]的宽可调范围内以10,000步的步长控制10ps的到达时间]。报告了在65nm工艺中的测量结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号