首页> 外文会议>International symposium on geotechnical aspects of underground construction in soft ground >Effect of polymer content on mechanical properties of thin spray-on liner
【24h】

Effect of polymer content on mechanical properties of thin spray-on liner

机译:聚合物含量对薄喷涂衬里机械性能的影响

获取原文

摘要

The use of Thin Spray-on Liner (TSL) as an alternative to shotcrete has drastically increased since 1990s when it was first developed and introduced to mines. In this study, tensile strength test, bond strength test, compression test with specimens coated by TSL, and two kinds of bending tests proposed by EFNARC (2008) were performed with two kinds of TSLs with different material compositions in order to evaluate their support capacities. As a result, both TSLs were shown to be satisfactory for the minimum performance requirements for a structural rock support suggested by EFNARC (2008) and tensile strength of a TSL was shown to increase as its content of polymer was higher. In contrast, its bond strength was shown to increase proportional to the content of a cementitious component especially at the early age.
机译:自1990年代首次将其开发并引入矿山以来,使用薄喷式衬砌(TSL)代替喷射混凝土的方法已大大增加。在这项研究中,对两种具有不同材料组成的TSL进行了拉伸强度测试,粘结强度测试,对TSL涂层试样的压缩测试以及EFNARC(2008)提出的两种弯曲测试,以评估其支撑能力。 。结果,两种TSL都满足EFNARC(2008)提出的结构岩石支撑的最低性能要求,并且随着聚合物含量的增加,TSL的拉伸强度也有所提高。相反,显示出其粘结强度与水泥成分的含量成比例地增加,尤其是在早期。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号