首页> 外文会议>International symposium on advanced optical manufacturing and testing technologies >Nitrogen dioxide detection based on MWCNTs/SnO_2 composites at room temperature
【24h】

Nitrogen dioxide detection based on MWCNTs/SnO_2 composites at room temperature

机译:基于MWCNTs / SnO_2复合材料的室温二氧化氮检测

获取原文

摘要

In this paper, Multi-walled carbon nanotubes (MWCNTs)-tin oxide (SnO_2) composites were selected as sensing materials to detect NO_2 with concentrations ranging from 10 ppm to 50 ppm. Two sensors with different mass fractions of SnO_2 and MWCNTs, i.e., 6.7% and 10%, were fabricated by airbrushing the composites on interdigitated electrodes (IDEs). Response performances of both sensors at room temperature were investigated. Results showed that the sensor with mass fraction of 10% exhibited a larger sensing response and a bigger sensitivity than the other one, and a good linearity was observed for both ones. In addition, both sensors had a good selectivity to NO_2 in comparison with the other five interfering gases.
机译:本文以多壁碳​​纳米管(MWCNTs)-氧化锡(SnO_2)复合材料为检测材料,以检测浓度范围为10 ppm至50 ppm的NO_2。通过在指叉电极(IDE)上喷刷复合材料,制造出两种具有不同质量分数SnO_2和MWCNT的传感器,分别为6.7%和10%。研究了两个传感器在室温下的响应性能。结果表明,质量分数为10%的传感器比另一个传感器表现出更大的感测响应和更大的灵敏度,并且两种传感器均具有良好的线性度。此外,与其他五种干扰气体相比,这两种传感器对NO_2的选择性都很好。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号