【24h】

A Study on the Diamond Lapping Direction Determination

机译:金刚石研磨方向的确定研究

获取原文

摘要

The anisotropy of material removal rate for diamond gives a method to control the lapping rate of diamond specimen, i.e. changing the lapping direction. This requires comprehension on the relationship of the material removal rate and the lapping direction for diamond. This paper provides a method to figure out the diamond lapping direction. By preprocessing a straight edge formed by lapping a surface intersects with the required machining surface, the diamond lapping direction can be figured out under the Confocal Scanning Laser Microscope only if the crystal directions of the two surfaces are determined at first. The advantage of our method is that there is no need to consider the position and posture of the diamond specimen fixed on the holder.
机译:金刚石的材料去除速率的各向异性提供了一种控制金刚石样品的研磨速率,即改变研磨方向的方法。这需要理解材料的去除率与金刚石的研磨方向之间的关系。本文提供了一种计算钻石研磨方向的方法。通过对通过研磨表面而形成的直边进行预处理,该直线与所需的加工表面相交,只有首先确定两个表面的晶体方向,才能在共聚焦扫描激光显微镜下确定金刚石的研磨方向。我们方法的优点是无需考虑固定在支架上的金刚石样品的位置和姿势。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号