【24h】

VISIR Upgrade Overview and Status

机译:VISIR升级概述和状态

获取原文

摘要

We present an overview of the VISIR upgrade project. VISIR is the mid-infrared imager and spectrograph at ESO's VLT. The project team is comprised of ESO staff and members of the original VISIR consortium: CEA Saclay and ASTRON. The project plan is based on input from the ESO user community with the goal of enhancing the scientific performance and efficiency of VISIR by a combination of measures: installation of improved hardware, optimization of instrument operations and software support. The cornerstone of the upgrade is the 1k by 1k Si:As AQUARIUS detector array (Raytheon) which has been carefully characterized in ESO's IR detector test facility (modified TIMMI 2 instrument). A prism spectroscopic mode will cover the N-band in a single observation. New scientific capabilities for high resolution and high-contrast imaging will be offered by sub-aperture mask (SAM) and phase-mask coronagraphic (4QPM/AGPM) modes. In order to make optimal use of favourable atmospheric conditions a water vapour monitor has been deployed on Paranal, allowing for real-time decisions and the introduction of a user-defined constraint on water vapour. During the commissioning in 2012 it was found that the on-sky sensitivity of the AQUARIUS detector was significantly below expectations and that VISIR was not ready to go back to science operations. Extensive testing of the detector arrays in the laboratory and on-sky enabled us to diagnose the cause for the shortcoming of the detector as excess low frequency noise (ELFN). It is inherent to the design chosen for this detector and can't be remedied by changing the detector set-up. Since this is a form of correlated noise its impact can be limited by modulating the scene recorded by the detector. We have studied several mitigation options and found that faster chopping using the secondary mirror (M2) of the VLT offers the most promising way forward. Faster M2 chopping has been tested and is scheduled for implementation before the end of 2014 after which we plan to re-commission VISIR. In addition an upgrade of the IT infrastructure related to VISIR is planned in order to support burst-mode operations. The upgraded VISIR will be a powerful instrument providing close to background limited performance for diffraction-limited observations at an 8-m telescope. It will offer synergy with facilities such as ALMA, JWST, VLTI and SOFIA, while a wealth of targets is available from survey work (e.g. VISTA, WISE). In addition it will bring confirmation of the technical readiness and scientific value of several aspects of potential mid-IR instrumentation at Extremely Large Telescopes.
机译:我们概述了VISIR升级项目。 VISIR是ESO VLT的中红外成像仪和光谱仪。该项目团队由ESO工作人员和VISIR原始财团的成员组成:CEA Saclay和ASTRON。该项目计划基于ESO用户社区的意见,其目标是通过多种措施来增强VISIR的科学性能和效率:安装改进的硬件,优化仪器操作和软件支持。升级的基础是1k x 1k Si:As AQUARIUS检测器阵列(Raytheon),该阵列已在ESO的IR检测器测试设备(改良的TIMMI 2仪器)中进行了精心设计。棱镜光谱模式将在一次观察中覆盖N波段。子孔径掩模(SAM)和相位掩模冠层照相(4QPM / AGPM)模式将为高分辨率和高对比度成像提供新的科学功能。为了最佳利用有利的大气条件,在Paranal上部署了水蒸气监测器,以便进行实时决策并引入用户定义的水蒸气约束条件。在2012年的调试中,发现AQUARIUS探测器的天空灵敏度明显低于预期,并且VISIR还没有准备好返回科学运行。在实验室和空中对检测器阵列进行了广泛的测试,使我们能够诊断出检测器不足的原因是低频噪声(ELFN)过多。它是为此检测器选择的设计所固有的,无法通过更改检测器设置进行补救。由于这是相关噪声的一种形式,因此可以通过调制检测器记录的场景来限制其影响。我们研究了几种缓解措施,发现使用VLT的辅助反射镜(M2)进行更快的斩波是最有希望的前进方向。更快的M2斩波已经过测试,计划于2014年底之前实施,此后我们计划重新启用VISIR。另外,计划对与VISIR相关的IT基础架构进行升级,以支持突发模式操作。升级后的VISIR将是一款功能强大的仪器,在8米望远镜中对衍射受限的观测提供接近于背景受限的性能。它将与ALMA,JWST,VLTI和SOFIA等设施提供协同作用,而调查工作(例如VISTA,WISE)可提供大量目标。此外,它将为超大型望远镜潜在中红外仪器在多个方面的技术准备和科学价值提供确认。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号