首页> 外文会议>Chinese Control and Decision Conference >A verification method for non-along track imaging based on three axis air bearing table
【24h】

A verification method for non-along track imaging based on three axis air bearing table

机译:基于三轴空气轴承台的非沿着轨道成像的验证方法

获取原文

摘要

In this paper, a non-along track imaging mode for remote sensing of satellite is introduced, and a ground experiment verification method is proposed, the feasibility of the control scheme is verified by mathematical simulation and physical experiment. The control requirements of satellite attitude in the non-along track imaging process are analyzed, based on the quaternion feedback control method proposed by Bong Wie, the attitude maneuver control law satisfying various constraints is given. By constructing a small three axis air bearing table control system and camera imaging system, the non-along track imaging scheme is verified. The experimental results show that the pointing control accuracy is better than 0.05 ° , the tracking accuracy of attitude angular velocity is better than 0.005 ° /s, and the imaging result of non-along track is good.
机译:本文介绍了用于遥感卫星遥感的非沿着轨道成像模式,提出了地面实验验证方法,通过数学模拟和物理实验验证了控制方案的可行性。分析了非沿着轨道成像过程的卫星姿态的控制要求,基于Bong Wie提出的四元度反馈控制方法,给出了满足各种约束的姿态操纵控制法。通过构造小的三轴空气轴承台控制系统和相机成像系统,验证了非沿着轨道成像方案。实验结果表明,指向控制精度优于0.05°,姿态角速度的跟踪精度优于0.005°/ s,非沿着轨道的成像结果良好。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号