首页> 外文会议>International symposium on precision mechanical measurements >Arbitrary and Absolute Length Measurement Based on Time-of-flight Method Using Femtosecond Optical Frequency Comb
【24h】

Arbitrary and Absolute Length Measurement Based on Time-of-flight Method Using Femtosecond Optical Frequency Comb

机译:飞秒光频梳基于飞行时间方法的任意和绝对长度测量

获取原文

摘要

In this paper, the application of femtosecond optical frequency comb for length measurement is analyzed and developed. Based on the modified Michelson interferometer by combining with multiple pulse train interference and time-of-flight method, an arbitrary and absolute length measurement system is set up. The timing difference is calculated by the first-order and second-order optical cross-correlation signals separately; therefore the absolute distance is obtained. An experiment of measuring a 60cm length is conducted and the results are compared with that from a high precision laser displacement sensor. Results show a good measuring linearity with the measurement precision of ±0.5μm.
机译:本文分析并开发了飞秒光学频率梳在长度测量中的应用。基于改进的迈克尔逊干涉仪,结合多脉冲串干扰和飞行时间方法,建立了任意,绝对长度测量系统。时序差分别由一阶和二阶光学互相关信号计算得出;因此获得了绝对距离。进行了60cm长的测量实验,并将其结果与高精度激光位移传感器的测量结果进行了比较。结果显示了良好的测量线性,测量精度为±0.5μm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号