In this article the complex research and development project of the laser cutting micromachining of nitinol alloys are shown. The laser cutting parameters of the 1.04 mm inner diameter and 0.1 mm wall thickness nitinol tubes are also shown. The laser cutting parameters of micromachining and the cut surface of nitinol tubes are summarized when 3 mJ pulse energy, 0.02 ms pulse duration, 6 bar Ar gas pressure, 3000 Hz frequency, 10 mm/s rotation speed and 5 mm/s~2 speed-up were used. The effect of the laser cutting to the raw material is characterized by microstructural and micromechanical examinations. A detailed description is given of the energy input by laser beam machining. The pulse and the impact of the applied pressure parameters of the gas to the raw material are also shown.
展开▼
机译:本文显示了镍钛诺合金激光切割微加工的复杂研究和开发项目。还显示了内径为1.04毫米,壁厚为0.1毫米的镍钛合金管的激光切割参数。当脉冲能量为3 mJ,脉冲持续时间为0.02 ms,气压为6 bar Ar,频率为3000 Hz,转速为10 mm / s,转速为5 mm / s〜2时,总结了镍钛合金管微加工的激光切割参数和切割面。 -up被使用。激光切割对原材料的影响以微观结构和微观机械检查为特征。给出了通过激光束加工输入的能量的详细描述。还显示了气体的脉冲和施加的压力参数对原材料的影响。
展开▼