首页> 外文会议>International symposium on photoelectronic detection and imaging >Design of a system based on DSP and FPGA for video recording and replaying
【24h】

Design of a system based on DSP and FPGA for video recording and replaying

机译:基于DSP和FPGA的视频录制和回放系统的设计。

获取原文

摘要

This paper brings forward a video recording and replaying system with the architecture of Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA). The system achieved encoding, recording, decoding and replaying of Video Graphics Array (VGA) signals which are displayed on a monitor during airplanes and ships' navigating. In the architecture, the DSP is a main processor which is used for a large amount of complicated calculation during digital signal processing. The FPGA is a coprocessor for preprocessing video signals and implementing logic control in the system. In the hardware design of the system, Peripheral Device Transfer (PDT) function of the External Memory Interface (EMIF) is utilized to implement seamless interface among the DSP, the synchronous dynamic RAM (SDRAM) and the First-In-First-Out (FIFO) in the system. This transfer mode can avoid the bottle-neck of the data transfer and simplify the circuit between the DSP and its peripheral chips. The DSP's EMIF and two level matching chips are used to implement Advanced Technology Attachment (ATA) protocol on physical layer of the interface of an Integrated Drive Electronics (IDE) Hard Disk (HD), which has a high speed in data access and does not rely on a computer. Main functions of the logic on the FPGA are described and the screenshots of the behavioral simulation are provided in this paper. In the design of program on the DSP, Enhanced Direct Memory Access (EDMA) channels are used to transfer data between the FIFO and the SDRAM to exert the CPU's high performance on computing without intervention by the CPU and save its time spending. JPEG2000 is implemented to obtain high fidelity in video recording and replaying. Ways and means of acquiring high performance for code are briefly present. The ability of data processing of the system is desirable. And smoothness of the replayed video is acceptable. By right of its design flexibility and reliable operation, the system based on DSP and FPGA for video recording and replaying has a considerable perspective in analysis after the event, simulated exercitation and so forth.
机译:本文提出了一种具有数字信号处理器(DSP)和现场可编程门阵列(FPGA)架构的视频记录和重放系统。该系统实现了视频图形阵列(VGA)信号的编码,记录,解码和重放,这些信号在飞机和轮船航行期间显示在监视器上。在体系结构中,DSP是主处理器,用于在数字信号处理期间进行大量复杂的计算。 FPGA是用于预处理视频信号并在系统中实现逻辑控制的协处理器。在系统的硬件设计中,外部存储器接口(EMIF)的外围设备传输(PDT)功能用于实现DSP,同步动态RAM(SDRAM)和先进先出( FIFO)。这种传输模式可以避免数据传输的瓶颈,并简化DSP及其外围芯片之间的电路。 DSP的EMIF和两级匹配芯片用于在集成驱动电子(IDE)硬盘(HD)的接口的物理层上实现高级技术附件(ATA)协议,该协议的数据访问速度很高,并且没有依靠计算机。描述了FPGA上逻辑的主要功能,并提供了行为仿真的屏幕截图。在DSP上的程序设计中,增强型直接内存访问(EDMA)通道用于在FIFO和SDRAM之间传输数据,从而在无需CPU干预的情况下将CPU的高性能应用于计算,从而节省了时间。 JPEG2000的实现是为了在视频记录和重放中获得高保真度。简要介绍了获得高性能代码的方法。需要系统的数据处理能力。回放视频的流畅度也是可以接受的。由于其设计的灵活性和可靠的操作性,基于DSP和FPGA的视频记录和重放系统在事件发生后的分析,模拟练习等方面具有相当大的前景。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号