FEATURES OF LAUNCH VEHICLE/PAYLOAD INTERFACE IN LAUNCH SYSTEMS WITH A TAKEOFF IN A HORIZONTAL POSITION ON THE EXAMPLE OF THE 'AIR LAUNCH' SPACE TRANSPORTATION SYSTEM

摘要

Satellite manufactures today are used to conventional vertical take-off launch systems. Their spacecraftsare designed to withstand a similar set of loads induced by the different launch vehicles only varying in magnitude.Also the design approaches and verification means are adopted to the loads induced by vertical take-off launchsystems.Horizontal take-off launch systems induce new load cases that have to be looked at separately. In the caseof AirLaunch much effort was spent to limit the magnitude of these additional load cases to ease AirLaunch'sintroduction on the market. The general approach was to either eliminate or limit additional load cases to amagnitude not critical for existing satellite designs in order to enable a maximum number of potential payloadcustomers rather than limiting them to specifically designed or adapted spacecrafts. Ideally a customer should beable to switch from vertical to horizontal take-off launch system without additional design effort due to additionalload cases.AirLaunch's load cases are presented and compared to conventional launch systems. The additional loadcases are explained and their impact to satellite design is analysed. Finally, it is shown that AirLaunch's load casesdo not require significant additional effort in the design process nor in the dimensioning of the spacecraft.