首页> 外文会议>International conference on nanochannels, microchannels and minichannels;ICNMM2011 >FLOW CHARACTERISTICS OF ADIABATIC GAS-LIQUID TWO-PHASE FLOW IN A HORIZONTAL FLAT RECTANGULAR MICROCHANNEL
【24h】

FLOW CHARACTERISTICS OF ADIABATIC GAS-LIQUID TWO-PHASE FLOW IN A HORIZONTAL FLAT RECTANGULAR MICROCHANNEL

机译:水平平板矩形微通道中绝热气液两相流的流动特性

获取原文

摘要

Experiments were performed to obtain, analyze and clarify the mean void fraction, the mean liquid holdup, and the liquid slug velocity and the air-water two-phase flow patterns in horizontal rectangular microchannels, with the dimensions equal to 1.0 mm width × 0.1 mm depth,and 1.0 mm width × 0.2 mm depth, respectively. The flow patterns such as bubble flow, slug flow and annular flow were observed. The microchannel data showed similar data patterns compared to those in minichannels with the width of 1~10mm and the depth of 1mm which we had previously reported on. However, in a 1.0 × 0.1 mm microchannel, the mean holdup and the base film thickness in annular flow showed larger values because the effects of liquid viscosity and surface tension on the holdup and void fraction dominate. The remarkable flow characteristics of rivulet flow and the flow with a partial dry out of the channel inner wall were observed in slug flow and annular flow patterns in the microchannel of 0.1 mm depth.
机译:进行实验以获取,分析和澄清水平矩形微通道中的平均空隙率,平均持液率,液团速度和气水两相流型态,尺寸等于1.0毫米宽×0.1毫米深度和1.0毫米宽×0.2毫米深。观察到诸如气泡流动,团状流动和环形流动的流动模式。与之前报道的宽度为1〜10mm,深度为1mm的微型通道相比,微通道数据显示出相似的数据模式。但是,在1.0×0.1 mm的微通道中,由于液体粘度和表面张力对滞留率和空隙率的影响占主导地位,在环形流动中平均滞留率和基膜厚度显示出较大的值。在0.1 mm深度的微通道中,在团状流和环形流模式中,观察到小溪流和部分干出通道内壁的流动的显着流动特性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号